|
|
Chain Guide Cover - Carbon Fiber Works
Description:
Chain Guide Cover
Price:
$116.99.
|
|
|
Rear Disc Guards - Carbon Fiber Works
Description:
Rear Disc Guards
Price:
$76.99.
|
|
|
Front Disk Guards - Carbon Fiber Works
Description:
Front Disk Guards
Price:
$103.99.
|
|
|
Fork Guards - Carbon Fiber Works
Description:
Fork Guards
Price:
$67.99.
|
|
|
PowerBomb Titanium Header - FMF
Description:
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
Click Here for Additional Exhaust Information
Price:
$566.99.
|
|
|
Fuel Graphic Series Goggles - Smith
Description: Smith Fuel Graphic Series Goggles
All the features of the Smith Top Fuel Goggles with custom graphics and specialty straps
Features:
Sweat-X F.A.T.™ 3-layer face foam
Articulating Outrigger Positioning System™
Custom paint and frame graphics
Specialty graphic strap
Medium Fit
Exchange only on closeout items
Product limited to stock on hand
Price:
$55.99.
|
|
|
PowerBomb SX Titanium Header - FMF
Description:
The Supercross (SX) version is designed for more low to mid-range power where the Moto version is focused in the mid to upper RPM range.
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
Click Here for Additional Exhaust Information
Price:
$269.99.
|
|
|
PowerBomb Titanium Header with Mid-Pipe - Factory 4 Silencer Only - FMF
Description:
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. by positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
**Note Must be used with FMF's Factory 4 Silencer
Click Here for Additional Exhaust Information
Price:
$566.99.
|
|
|
PowerBomb Stainless Header with Mid-Pipe for Factory 4 Silencer Only - FMF
Description:
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. by positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
**Note Must be used with FMF's Factory 4 Silencer
Click Here for Additional Exhaust Information
Price:
$359.99.
|
|
|
2006 Kawasaki Zoo York Graphics Kit - Factory Effex
Description: Zoo York graphics kits for Kawasaki dirt bikes, from Factory Effex's 2006 line of products.
Price:
$51.99.
|
|
|
PowerBomb Stainless Steel Header - FMF
Description: The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity. Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
Click Here for Additional Exhaust Information
Price:
$359.99.
|
|
|
PowerBomb SX Stainless Steel Header - FMF
Description:
The Supercross (SX) version is designed for more low to mid-range power where the Moto version is focused in the mid to upper RPM range.
The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
Click Here for Additional Exhaust Information
Price:
$179.99.
|
|
|
PowerBomb Factory Forward Titanium Header - FMF
Description: FMF pioneered "Factory Forward" engineering= longer header and more torque while moving the muffler further forward in the frame, shortening the midpipe and muffler length to centralize mass and lower the center of gravity for improved handling. The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system.
Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity. Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).
Click Here for Additional Exhaust Information
Price:
$269.99.
|
|
|
Zoo York Pit Bike Graphics Kit - Factory Effex
Description: Zoo York® graphics kits for various pit bikes, from Factory Effex.
Price:
$43.99.
|
|
|
MegaBomb Titanium Header - FMF
Description: Derived from PowerBomb technology, the MegaBomb represents the natural evolution of performance -- improve on it, make it better. What started as a PowerBomb just kept growing. Simply put, the bigger it got, the better it worked. The engineering wasn't that simple, they had to fine tune the internal characteristics and there was an upper limit to what was feasible for performance as well as function, but through arduous testing, here you have it! The very same header you’ve seen on the Factory KTM and Yamaha of Troy bikes as well as Team Suzuki Off-Road and that of Ryan Hughes. This is not ‘Un-obtainium’. The MegaBomb™ ships right out of our warehouse to you just as it would to any race team!
What makes a MegaBomb so different? There are two key aspects. First, the more exhaust gases that are extracted, the better. Like the difference between a garden hose and a fire hose -- except, too much is not good. The calculated size of the MegaBomb chamber, with the precise location and size of internal ducts, makes for increased volume. The second aspect is the performance difference between a short header, better over-rev, and a long header, better low-end torque. With the MegaBomb, you get the best of both. The added volume acts like a long header and the length has not been increased.
Features:
Works well with sound restricting mufflers
Reduces sound output by as much as 1.5dB
Less susceptible to damage than a long header
Produces low end of a long header and top end of a short header
Improved bottom to mid-range power
Exclusive Ti-Metal construction
Click Here for Additional Exhaust Information
**Note: KTM 250 SX-F pipe replaces PowerBomb header on Factory4 and 4.1 systems. Not for use with stock mid-pipe and silencer
Price:
$539.99.
|
|
|
Hi-Flo Stainless Steel Header - FMF
Description:
FMF Hi-Flo Stainless Steel Headers provide excellent weight savings combined with improved performance characteristics that help make every four stroke rip. This is one of the finest bolt-on mods that you can make to your machine. The Hi-Flo was designed to enhance the overall power of your machine making it the perfect choice for upgrading your stock system.
Also available in Titanium
Click Here for Additional Exhaust Information
Price:
$215.99.
|
|
|
RS-2 Diamond Pro Series Full System - Yoshimura
Description: Yoshimura RS-2 Diamond Pro Series Full System
The RS-2 Diamond Pro Exhaust System from Yoshimura features:
New diamond-shape muffler design improves power output
Muffler shape increases durability and performance from muffler packing
Two-stage large race baffle allows optimal performance throughout the rev range
Pro Series exhaust features titanium header construction
Pro Series mufflers have glossy carbon fiber or satin-finish titanium muffler sleeve
Adjustable billet aluminum muffler mount bracket
Click Here for Additional Exhaust Information
Price:
$716.99.
|
|
|
RS-3D Pro Series Full Dual System - Yoshimura
Description:
Designed specifically for the new Honda CRF250R, the RS-3D utilizes an ultra-trick dual muffler setup that was perfected through hours of research and development making it not only the best looking and sounding exhaust available, but the best performing as well.
Muffler shape increases durability and performance from muffler packing
Two-stage large race baffle allows optimal performance throughout the rev range
Pro Series exhaust features titanium header and mid-pipe construction
Pro Series mufflers have glossy carbon fiber or satin-finish titanium muffler sleeve
Includes heat shield, spring puller tool and wash plug
Click Here for Additional Exhaust Information
Price:
$875.99.
|
|
|
TRC Pro Series Full System - Yoshimura
Description: The TRC Pro Series Pipes are the thoroughbreds of the Yoshimura off-road exhaust line. Leading the way in titanium pipe technology for the last 25 years, Yoshimura Pro Pipes are the answer for the serious racer. The TRC Pro pipes come with an Aluminum, Carbon Fiber or Titanium muffler with a tig-welded grade 2 titanium header pipe. Don't get left behind...ride Yoshimura!
Click Here for Additional Exhaust Information
Price:
$676.99.
|
|
|
EVO 3 Series Suzuki Graphics Kits - Factory Effex
Description:
EVO 3 series graphics kits for Suzukii dirt bikes and pit bikes.
Printed on durable, scratch resistant 16mm Ultracurve vinyl that is four times thicker than stock.
Special gas tank adhesive and anti-snag tabs.
Most graphics kits include shroud, gas tank and airbox graphics for both sides.
All-grip seat cover and DX-1 Number plate NOT included
Graphics kits are specific to bike models, so the actual product may vary from the web image.
Price:
$51.99.
|
|
|
Low Volume Spark Arrestor Insert - Yoshimura
Description:
Works in both the Pro and Comp Series exhaust systems
Designed to reduce noise levels
Bolts right into the 2-piece endcap
USFS spark arrestor legal
Price:
$20.99.
|
|
|
TRC Comp Series Full System - Yoshimura
Description:
Tri-oval muffler shape gives unique looks, sound and clearance
Design ensures a smooth gas flow rate for superior performance and provides an impressive increase across the entire rev range
304L stainless steel header and mid-pipe construction
TRC tri-oval canister with unique three-sided design and two-piece style end cap with removable U.S.F.S.-approved screen-type spark arrestor
Available with polished aluminum or glossy carbon fiber muffler
Click Here for Additional Exhaust Information
Price:
$476.99.
|
|
|
DVS Core Pit Bike Graphics Kit - Factory Effex
Description:
DVS graphics kits for pit bikes from Factory Effex's newest line of products.
Kit includes shrouds, fenders, lower forks and number plates.
All-grip seat cover NOT included.
Graphics Kits are specific to bike model, so actual product may vary from web image.
Price:
$47.99.
|
|
|
Metal Mulisha ATV Graphics Kit - Factory Effex
Description:
Printed on durable, scratch-resistant 16mm. Ultracurve vinyl that is four times thicker than stock.
Special gas tank adhesive and anti-snag tabs.
Kit includes gas tank, front and side graphics.
All-grip seat cover NOT included
Price:
$55.99.
|
|
|
TRC Comp Series Slip-On - Yoshimura
Description: Yoshimura TRC Comp Series Slip-On
Tri-oval muffler shape gives unique looks, sound and clearance
Design ensures a smooth gas flow rate for superior performance and provides an impressive increase across the entire rev range
304L stainless steel mid-lpipe
TRC tri-oval canister with unique three-sided design and two-piece style end cap with removable U.S.F.S.-approved screen-type spark arrestor
Available with polished aluminum or glossy carbon fiber muffler
Click Here for Additional Exhaust Information
Price:
$316.99.
|
|
|
Monster Energy ATV Graphics Kit - Factory Effex
Description:
Printed on durable, scratch-resistant 16mm. Ultracurve vinyl that is four times thicker than stock.
Special gas tank adhesive and anti-snag tabs.
Kit includes gas tank, front and side graphics.
All-grip seat cover NOT included
Price:
$55.99.
|
|
|
EVO 3 Yamaha ATV Graphics Kit - Factory Effex
Description:
Printed on durable, scratch-resistant 16mm. Ultracurve vinyl that is four times thicker than stock.
Special gas tank adhesive and anti-snag tabs.
Kit includes gas tank, front and side graphics.
All-grip seat cover NOT included
Price:
$55.99.
|
|
|
Accelerant Jacket - Icon
Description: Icon Accelerant Jacket
What would happen if near-weightless metal alloys, carefully woven textile fibers, and thick thermoplastic rubbers were all combined to create light, effective body armor, and then built into an aggressively cut street riding jacket? What if the concept were pushed further still, and the chassis were built combining the industry's most advanced Stretch Ballistic Nylon with the proven durability of Icon leather? These are the questions that drove our designer to create the Accelerant Jacket. The results are inspiring.
Features:
The Icon Accelerant Leather Jacket features 1.2-1.4 mm premium cowhide
External back and shoulder protection with alloy inserts
Strategically placed stretch ballistic nylon for comfort
CE® approved shoulder and elbow armor
Removable insulated windproof liner
Zippered shoulder vents
Price:
$380.00.
|
|
|
Hooligan Decay Jacket - Icon
Description: Icon Hooligan Decay Jacket
Icon's Hooligan Decay Jacket has a breathable fighter mesh chassis which stands up to the toughest wear and conditions
Removable CE® approved shoulder and elbow armor
Internal zippered storage pockets hold sunglasses, maps and more
Comfortable lined collar
No-fade graphics
Price:
$195.00.
|
|
|
EVO Suzuki ATV Graphics Kit - Factory Effex
Description:
Printed on durable, scratch-resistant 16mm. Ultracurve vinyl that is four times thicker than stock.
Special gas tank adhesive and anti-snag tabs.
Kit includes gas tank, front and side graphics.
All-grip seat cover NOT included
Price:
$55.99.
|
