|
|
Rocket Staff Shirt - Joe Rocket
Description:
Heavy weight cotton/poly blend
Embroidered logos
Price:
$58.99.
|
|
|
Oversize Front Wave Rotor Kit - Galfer
Description:
270mm full floating rotor
Relocation bracket
Semi-metallic brake pads
Price:
$254.99.
|
|
|
Rally Brush Handguard Spoiler - Acerbis
Description:
Rally Brush Handguard Spoiler from Acerbis
Price:
$20.99.
|
|
|
Carbon Fiber Tank Cover - Carbon Fiber Works
Description:
Made with aviation quality epoxy resin
Vacuum formed to ensure proper fitment
UV protection coating to prevent yellowing
Coating ensures finish consistency
Replaces O.E.M. plastic fuel tank cover
100% high quality carbon fiber
Hand-crafted in the USA
Price:
$301.99.
|
|
|
908 Skull Helmet Liner - O'Neal Racing
Description:
908 Skull Helmet Liner from O'Neal
Price:
$19.99.
|
|
|
Carbon Fiber Tank Sides - Carbon Fiber Works
Description:
Made with aviation quality epoxy resin
Vacuum formed to ensure proper fitment
UV protection coating to prevent yellowing
Coating ensures finish Consistency
Replaces O.E.M.
100% high quality carbon fiber
Hand-crafted in the USA
Price:
$179.99.
|
|
|
Offroad Front Brake Line - MSR Racing
Description:
Braided stainless steel casing protected by clear vinyl covering for durability
PTFE 62 inner casing for minimum expansion under pressure
Provides stronger, more progressive action than stock
Available in Standard (direct replacement of your stock brake line) or Shorty CR style for a conversion to the shorter Honda style routing
Kit includes banjo bolts and washers
Price:
$64.99.
|
|
|
Front Brake Reservoir Cover - Carbon Fiber Works
Description:
Carbon Fiber Front Brake Reservoir Cover
Keeps harmful UV rays off your fluids
Made with aviation-grade epoxy resin
Vacuum formed to ensure proper fitment
UV protection coating to prevent yellowing and ensures finish consistancy
Hand-crafted in the U.S.A.
Price:
$35.99.
|
|
|
Swingarm Skid Plate - Moose Racing
Description:
Swingarm Skid Plate from Moose Racing
Standard rear swingarm skid plates for the sport and utility quads are fabricated from 3/16” aluminum
Securely mounted using either the stock mounts or our tough heat-treated chromoly steel clamps or a combination of both
Clear anodized finish
No drilling or modifications are required to install
Price:
$163.95.
|
|
|
Carbon Fiber Clutch Protector - Carbon Fiber Works
Description:
Made from aviation-quality epoxy resin
Vacuum formed to ensure proper fitment
UV protection coating to prevent yellowing
Coating ensures finish consistency
Replaces O.E.M
Hand crafted in the USA
Price:
$35.99.
|
|
|
Carbon Fiber Rear Brake Reservoir - Carbon Fiber Works
Description:
Made from aviation-quality epoxy resin
Vacuum formed to ensure proper fitment
UV protection coating to prevent yellowing
Coating ensures finish consistency
Replaces O.E.M
Hand crafted in the USA
Price:
$35.99.
|
|
|
Offroad Rear Brake Line - MSR Racing
Description:
Braided stainless steel casing protected by clear vinyl covering for durability
PTFE 62 inner casing for minimum expansion under pressure
Provides stronger, more progressive action than stock
Kit includes banjo bolts and washers
Price:
$64.99.
|
|
|
Juice Box Fuel Controller - Two Brothers Racing
Description: Your electronically fuel-injected motorcycle/ATV can now boast improved drivability and more power with the Two Brothers Racing “Juice Box™” fuel controller. The Juice Box™ features simple plug and play installation and quick and easy adjustment. No need for computers and complex maps, just use the integrated buttons & LED display. Uses carburetor tuning logic for easy to understand fuel adjustments. If you plan to modify your vehicle then our Juice Box™ is a must. This easy-to-use control unit plugs directly into the OEM wiring harness between the stock ECU and fuel injectors providing precise control of the engine’s fuel management system.
Allows addition of fuel required with engine modifications without upsetting stock fuel map
Integrated buttons provide easy adjustment and fine-tuning of fuel delivery curve without external programming devices
LED lights indicate fuel delivery settings
while tuning
Won’t interfere with bike’s stock sensors
and inputs
Increases horsepower
Improves throttle response
Installs in minutes
New third generation technology
No computer needed to adjust your JUICE BOX™
Plug-in technology
(Doesn’t interfere with stock ECU map)
Integrated buttons provide easy adjustment
Click Here for Two Brothers Racing Juice Boost for LTR450's
Price:
$284.99.
|
|
|
Professional Tire Guage - Motion Pro
Description: These tire pressure gauges, initially designed for professional race teams, are now available to race enthusiasts. Motocross Action Magazine gave these pressure gauges a five-star rating, stating: "This is a five-star product for factory mechanics and riders who care about accurate tire pressure."
Features:
2.5" liquid filled gauge with multicolored face (psi & Kpa) and heavy duty protective gauge boot gives consistent readings regardless of temperature or elevation
Blue anodized 6061 aluminum trapezoidal body with integrated push button bleeder valve for easy air pressure adjustments
18" premium hose with dual swivels and brass push-on ball chuck
Motion Pro recommends the following when choosing a pressure gauge model:
0-15 psi (recommended for ATV)
0-30 psi (recommended for MX & Off-road)
0-60 psi (recommended for Street)
Price:
$96.95.
|
|
|
K177 OEM Model-Specific Rear Tire - Dunlop
Description: The K177 is an O.E. replacement Tire. Dunlop is committed to providing O.E. replacement tires for sport, touring and cruiser motorcycles. Bikes that started with the best, should always have the best. Dunlop O.E. partners include Arctic Cat, Aprilia, BMW, Buell, Ducati, Harley-Davidson, Honda, Kawasaki, Polaris, Suzuki, Victory, and Yamaha.
O.E. Fitments:
160/80HB-16 = Honda GL1500 GoldWing 1988-2000
Price:
$162.99.
|
|
|
Pilot Sport SC Radial Front Tire - Michelin
Description: Michelin Pilot Sport SC Radial Front Tire
Pilot Sport SC Radial Front Tire
Comfortable ride and outstanding durability
Precise steering and maneuverability
Performance oriented casing profile
Radial casing helps maintain high-speed stability and promotes uniform tread wear
Price:
$89.99.
|
|
|
Pilot Sport SC Radial Rear Tire - Michelin
Description: Michelin Pilot Sport SC Radial Rear Tire
Comfortable ride and outstanding durability
Precise steering and maneuverability
Performance oriented casing profile
Radial casing helps maintain high-speed stability and promotes uniform tread wear
Price:
$116.99.
|
|
|
Element T-Shirt - One Industries
Description: Element T-shirt from One Industries
For 2009, One Industries drew upon it?s unique influences to create a casual wear line that comes from a new and different place. Determined to lead the way in fusing modern fashion and the sport of motocross, One looked at alternative forms of sport, culture and design. Then they took the elements that inspired them and wove them into a new line of clothing that moves far outside the margins. One Industries. Motovated.
Price:
$17.99.
|
|
|
RX-7 Corsair Colin Replica - Arai
Description:
Relaxed Round Oval fit: Similar to the Quantum series "Round Oval" fit but not as pronounced
"Delta-3" top center intake scoop, scavenges more air to help improve airflow even further
Shell incorporates a reduced gap between the shield and shell to minimize wind turbulence over the shield and onto the shell
Chin vent design, with dual-pivot hinge mechanism, allows for a more easily operable single span vent gate with an increased airflow capacity
Enhanced organic shell shape, bottom trim and (non-removable) neck roll which curve in at the bottom to give a more natural appearance, which also helps minimize wind turbulence
Rubber breath guard, designed to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield
SNC "Structural Net Composite" shell construction, utilizes a patented shell construction that incorporates a structural net reinforcing material, embedded between Arai's® exclusive Super complex laminated construction layers, which improves resistance to shearing forces. This allows for more weight to be removed from the top of the shell, both reducing overall helmet weight and improving the center of gravity
Shell mold features to strengthen the shell, enhance airflow and overall appearance
Type-8 diffuser design with redesigned and improved intake and exhaust ports to both improve airflow and reduce wind turbulence
"Dry-CoolTM" liner material, with a rich color and perforated satin feel, utilizes water cells to improve moisture and heat transfer from your head into the airflow around Arai's® unique space frame liner. Leaves your head dryer and cooler at the end of a long or hot ride and allows the liner to dry much faster in between rides. Dimensions and mounting method of both the cheek pads and head liner are the same as previous RX-7RR series. Removable liner/cheek pads.
SAJ side pods have a lower profile and are much more flush with the shell of the helmet to provide a much cleaner look
Meets or exceeds Snell and D.O.T. standards
Arai Helmet Sizing Specifications
Arai Interior Shape Diagrams
Price:
$703.99.
|
|
|
RX-7 Corsair Majestic Helmet - Arai
Description:
Relaxed Round Oval fit: Similar to the Quantum series "Round Oval" fit but not as pronounced
"Delta-3" top center intake scoop, scavenges more air to help improve airflow even further
Shell incorporates a reduced gap between the shield and shell to minimize wind turbulence over the shield and onto the shell
Chin vent design, with dual-pivot hinge mechanism, allows for a more easily operable single span vent gate with an increased airflow capacity
Enhanced organic shell shape, bottom trim and (non-removable) neck roll which curve in at the bottom to give a more natural appearance, which also helps minimize wind turbulence
Rubber breath guard, designed to better direct fresh air to the inside surface of the shield while at the same time directing hot breath down and away from the inside surface of the shield
SNC "Structural Net Composite" shell construction, utilizes a patented shell construction that incorporates a structural net reinforcing material, embedded between Arai's® exclusive Super complex laminated construction layers, which improves resistance to shearing forces. This allows for more weight to be removed from the top of the shell, both reducing overall helmet weight and improving the center of gravity
Shell mold features to strengthen the shell, enhance airflow and overall appearance
Type-8 diffuser design with redesigned and improved intake and exhaust ports to both improve airflow and reduce wind turbulence
"Dry-CoolTM" liner material, with a rich color and perforated satin feel, utilizes water cells to improve moisture and heat transfer from your head into the airflow around Arai's® unique space frame liner. Leaves your head dryer and cooler at the end of a long or hot ride and allows the liner to dry much faster in between rides. Dimensions and mounting method of both the cheek pads and head liner are the same as previous RX-7RR series. Removable liner/cheek pads.
SAJ side pods have a lower profile and are much more flush with the shell of the helmet to provide a much cleaner look
Meets or exceeds Snell and D.O.T. standards
Arai Helmet Sizing Specifications
Arai Interior Shape Diagrams
Price:
$703.99.
|
|
|
Earthtones T-Shirt - One Industries
Description: Earthtones T-Shirt from One Industries
For 2009, One Industries drew upon it?s unique influences to create a casual wear line that comes from a new and different place. Determined to lead the way in fusing modern fashion and the sport of motocross, One looked at alternative forms of sport, culture and design. Then they took the elements that inspired them and wove them into a new line of clothing that moves far outside the margins. One Industries. Motovated.
Price:
$17.99.
|
|
|
Oneology T-Shirt - One Industries
Description:
Oneology T-Shirt from One Industries
Get to know yourself and look good while doing it
Price:
$17.99.
|
|
|
Profile Wraithen Replica Helmet - Arai
Description:
Long Oval fit: The traditional Arai fit in which the head length is distinctly narrow side-to-side, combined with a longer front to back measurement
Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material
Optically-correct pre-formed faceshields better vision, UV ray protection with less distortion
De-Mist Lock faceshield tab pushes forward to open the shield slightly help clear fogging
Removable Breathguard reduce fogging by deflecting breath away from faceshield
CLC (Complex Laminate Construction) shell fiberglass composite is stronger and lighter allows use of softer, less-dense liner materials inside for increased rider comfort
FFS (FreeFlow System) reduces wind turbulence while increasing the exhaust of hot air from the facial area
Dual Intake / Dual Exhaust Ventilation dual TDF-2 top intake vents and DDL-3 bridged exhaust vents designed to draw significant volume of air from helmet interior
Multiple-Foam Interiors for comfort
Rear Exhaust Channel and Vent adds a racy look while drawing hot air from helmet interior
Fully removable liner and cheek pads
New enhanced pull down chin spoiler, increases exhaust of hot breath to minimize shield fogging
Meets or exceeds Snell and D.O.T. standards
Arai Helmet Sizing Specifications
Arai Interior Shape Diagrams
Price:
$566.99.
|
|
|
Spazzure T-Shirt - One Industries
Description: Spazzure T-Shirt from One Industries
For 2009, One Industries drew upon it?s unique influences to create a casual wear line that comes from a new and different place. Determined to lead the way in fusing modern fashion and the sport of motocross, One looked at alternative forms of sport, culture and design. Then they took the elements that inspired them and wove them into a new line of clothing that moves far outside the margins. One Industries. Motovated.
Price:
$17.99.
|
|
|
Skully T-Shirt - One Industries
Description: Skully T-Shirt from One Industries
For 2009, One Industries drew upon it?s unique influences to create a casual wear line that comes from a new and different place. Determined to lead the way in fusing modern fashion and the sport of motocross, One looked at alternative forms of sport, culture and design. Then they took the elements that inspired them and wove them into a new line of clothing that moves far outside the margins. One Industries. Motovated.
Price:
$19.99.
|
|
|
Crazy Train T-Shirt - One Industries
Description:
Crazy Train T-Shirt from One Industries
Price:
$17.99.
|
|
|
Quantum II Jungle Helmet - Arai
Description:
Round Oval fit: The transitional fit in which the head is distinctly rounder, with length and width almost even
Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material
Optically-correct pre-formed faceshields better vision, UV ray protection with less distortion
De-Mist Lock faceshield tab pushes forward to open the shield slightly help clear fogging
Shell incorporates smaller gap between shield and shell to reduce wind noise, same breathguard as found in the RX-7 Corsair
Shell is Super Complex Laminate Construction (Super CLC), redesigned aerodynamic shape with molded details to add character, increase shell strength, and enhance the performance of the upgraded side exhaust vents
Chin Spoiler
Top mounted (TD-4) vent design is recessed into the shell for a clean look
Uses SAJ shield side pod like RX-7 Corsair and Astral for easier operation, uses the single span, dual pivot hinge chin vent as found on the RX-7 Corsair
Fully removable washable interior, cheek pads are the same as RX-7-RR4, Astral and Astral-X
Meets or exceeds Snell and D.O.T. standards
Arai Helmet Sizing Specifications
Arai Interior Shape Diagrams
Price:
$538.99.
|
|
|
DRT-X Bionic Helmet - KBC
Description: KBC DRT-X Bionic Helmet
Hi Impact Solvent Resistant Alloy PC Shell
Rear exhaust vents
New visor design for Multi positional sun and debris control
Fully removable, washable inner comfort liner
Meets or exceeds SNELL and DOT standards
Price:
$107.99.
|
|
|
Quantum II Spike Helmet - Arai
Description:
Round Oval fit: The transitional fit in which the head is distinctly rounder, with length and width almost even
Brow Vent Faceshield Ventilation System provides cooling air in upper face area without holes in critical forehead area of the shell or in the impact-absorbing liner material
Optically-correct pre-formed faceshields better vision, UV ray protection with less distortion
De-Mist Lock faceshield tab pushes forward to open the shield slightly help clear fogging
Shell incorporates smaller gap between shield and shell to reduce wind noise, same breathguard as found in the RX-7 Corsair
Shell is Super Complex Laminate Construction (Super CLC), redesigned aerodynamic shape with molded details to add character, increase shell strength, and enhance the performance of the upgraded side exhaust vents
Chin Spoiler
Top mounted (TD-4) vent design is recessed into the shell for a clean look
Uses SAJ shield side pod like RX-7 Corsair and Astral for easier operation, uses the single span, dual pivot hinge chin vent as found on the RX-7 Corsair
Fully removable washable interior, cheek pads are the same as RX-7-RR4, Astral and Astral-X
Meets or exceeds Snell and D.O.T. standards
Arai Helmet Sizing Specifications
Arai Interior Shape Diagrams
Price:
$538.99.
|
|
|
Orion T-Shirt - FMF
Description:
New designs from the leader of offroad perfomance FMF Racing
Price:
$19.99.
|
