|
|
StormShield Heated Gloves - EXO2
Description: EXO2 StormShield Heated Gloves
StormShield - The new EXO2 Heated Motorcycle Glove has arrived. Our internal piping system delivers heat to all the right places and you can even link StormShield to your StormRider Bodywarmer and to the optional StormRider Controller Unit. Not only does this glove remove the curse of frozen fingers, it is an excellent product for serious all-year around motorcyclists.
Waterproof, Windproof & Breathable Porelle Insert for Comfort and Safety
Back & Cuff in Cordura with Cowhide Leather water-repellent reinforcements for Comfort
Moulded PVC Knuckle Protectors covered with Carbo-Leather for Safety
Carbo-Leather reinforcements on cuffing and little finger for Safety
Hook & Loop wrist and cuff closure for Comfort and Safety
Visor Wipe on each thumb for Safety
Polyester Cloth lining for Comfort
Foam Insulation at Palm and Back for Comfort and Safety
Palm made with Amara Synthetic Leather (60% polyester/nylon + 40% polyurethane) for Flexibility and Grip
Glove cable harness (with cable tidy) for wearing around the shoulders, down back/front underneath jacket to meet fused motorcycle power cable and threading along each jacket sleeve to link with StormShield Gloves. Also supplied is Y-Section for linking to StormRider Bodywarmer and/or StormRider Controller Unit if required
EXO2 Branding Strip
Power Requirement - Each glove draws approx. 0.6Amps so 1.2Amps for the pair
Price:
$206.99.
|
|
|
HeatSole Heated Insoles - EXO2
Description: EXO2 HeatSole Heated Insoles
Single insole length (cut to size) and leather covered for Comfort & Breathability
Tiny Li-Ion Power Packs with pouch clips & LED's delivering 5-7 hours heat per charge (two power packs and one charger per pair)
FabRoc heat panels self-regulate at approximately 45 degrees C to thaw out frozen toes (or stop them freezing in the first place !)
Ideal for ski-ing, hiking, motorcycling, fishing, riding, hunting and for all those struggling with poor circulation
Velcro strap for clipping power pack to lower leg if not wearing boots (under trousers/jeans etc.)
Price:
$116.99.
|
|
|
Meridian Fleece Jacket - Vega
Description: Vega Meridan Fleece Jacket
Tri-ply fleece fabric is lightweight, warm, wind and waterproof (this is the same fabric as much more expensive fleece jackets)
Wear indoors or out, alone or as liner for any jacket
Reflective piping front and back
Zippered, slash front and warmer pockets
Zippered exterior chest pockets
Hook/loop interior breast pocket
Knitted cuff
Drawstring hip cord
Men’s front and back straight yoke
**Closeouts are limited to stock on hand**
Price:
$27.99.
|
|
|
PowerPack Package 14.8V - EXO2
Description: EXO2 PowerPack Package 14.8V
14.8 Volt AC Power Pack
Charger Unit
Power Cord
Price:
$80.99.
|
|
|
Power Pack 14.8V - EXO2
Description: EXO2 Power Pack 14.8V
Price:
$53.99.
|
|
|
StormRider Controller Unit - EXO2
Description: EXO2 StormRider Controller Unit
Optional for use with StormRider Bodywarmer and/or StormShield Gloves. The controller has a mount, which is designed to fit onto the existing clutch cable mounting. Simply remove the top bolt from the clutch mounting, pass it through the mounting plate and refit the bolt to the clutch mounting.
Note :
Under no circumstances remove the backing plate as this could lead to disorientation of the washer seals and to eventual water ingress with consequent failure of the unit.
Price:
$48.99.
|
|
|
Cord Adaptor 12V - EXO2
Description: EXO2 Cord Adaptor 12V
Accessory Socket Power Cord
Price:
$17.99.
|
|
|
Charger Unit - EXO2
Description: EXO2 Charger Unit
Includes charger unit and power cord
Price:
$26.99.
|
|
|
High Performance Shock - Pro Wheel
Description:
Nitrogen filled, rebuildable high performance shock is a half inch longer than stock. Gives more overall wheel travel
Perfect upgrade for stock framed bikes
Standard spring for riders 145-170 lbs
Price:
$145.95.
|
|
|
SP-5 Fork Assembly - BBR
Description: Value and proven performance. The BBR SP-5 Front Fork Kit offers 5" of travel with superior dampning control and bottoming resistance. The fork kit includes: SP-5 fork set, CNC machined tripleclamp set with lightweight aluminum steering stem and tapered steering bearing set. BBR full handlebar kit also available.
Features:
Oil dampened 27mm conventional style forks
Black or silver anodized CNC machined billet top clamp, bottom clamp and stem
Heavy duty fork springs
5 inches of travel
Available with or without bar kit
Uses stock front wheel and brake
Price:
$377.99.
|
|
|
Super Max Pax Sissy Bar Bag - Willie and Max
Description: The Super Max-Pax tour pack is as functional as they are good looking, the Super Max-Pax tour pack is designed for everyday use, not just the once a year rally or road trip. This large sissy bar mounted trunk allows you to take more than just your rain gear when going on trips, without jeopardizing your center of gravity. The Nickel-plated D-rings give you the ability to bungee additional items on top of the tour pack.
Features:
Clean, no-nonsense look that doesn’t distract from the graceful lines of your bike
Constructed of high tech synthetic leather, nickel chrome plated snaps and genuine roller pin buckles
Features quick release buckles
18”x 9 ½”x 10”
Price:
$111.99.
|
|
|
SP-5 Fork Assembly with Bar Kit - BBR
Description: Value and proven performance. The BBR SP-5 Front Fork Kit offers 5" of travel with superior dampning control and bottoming resistance. The fork kit includes: SP-5 fork set, CNC machined tripleclamp set with lightweight aluminum steering stem, tapered steering bearing set, and BBR full handlebar kit
Features:
Oil dampened 27mm conventional style forks
Black, silver, or gold anodized CNC machined billet top clamp, bottom clamp and stem
Heavy duty fork springs
5" of travel
Available with or without bar kit
Uses stock front wheel and brake
Price:
$476.99.
|
|
|
Switchback Main Bag - Willie and Max
Description:
Switchback Main Bag by Willie and Max
Modular luggage system that adapts to all riding situations
1680 Polyester construction with molded carry handle, shoulder strap, rain covers, and non-slip base for secure mounting
All switchback luggage will attach to each other for many storage configurations to suit your needs
Is reinforced with ABS plastic
Weight bearing steel frame that will never sag or collapse when they are empty
Price:
$99.99.
|
|
|
Switchback Overnight Bag - Willie and Max
Description:
Switchback Overnight Bag by Willie and Max
Modular luggage system that adapts to all riding situations
1680 Polyester construction with molded carry handle, shoulder strap, rain covers, and non-slip base for secure mounting
All switchback luggage will attach to each other for many storage configurations to suit your needs
Reinforced with ABS plastic
Weight bearing steel frame that will never sag or collapse when they are empty
Price:
$62.99.
|
|
|
Adjustable Linkage - BBR
Description: Machined from billet aluminum with stainless steel inserts. Allows height adjustment of: Stock, +1", -1", +1/2" and -1/2"
Features:
CNC machined 6061 aluminum.
Red anodized with BBR logo
Stainless steel inserts to select length of link
5 seat heights available: Stock, +1", -1", +1/2" and -1/2"
Includes bearings and seals
Price:
$206.99.
|
|
|
Switchback Garment Bag - Willie and Max
Description:
Switchback Garment Bag by Willie & Max
Modular luggage system that adapts to all riding situations
1680 Polyester construction with molded carry handled, shoulder strap, rain covers, and non-slip base for secure mounting
All switchback luggage will attach to each other for many storage configurations to suit your needs
Is reinforced with ABS plastic
Price:
$82.99.
|
|
|
Billet Linkage - BBR
Description: Machined from billet aluminum. Includes high quality needle bearings and seals. Raises seat height.
Features:
Billet aluminum
Raises seat height 1" (for CRF150) or 1/2" for (CRF230)
Perfect match for BBR triple clamp
Includes bearings and seals
Price:
$134.99.
|
|
|
Switchback Roll Bag - Willie and Max
Description:
Switchback Roll Bag by Willie & Max
Modular luggage system that adapts to all riding situations
1680 Polyester construction with molded carry handled, shoulder strap, rain covers, and non-slip base for secure mounting
All switchback luggage will attach to each other for many storage configurations to suit your needs
Is reinforced with ABS plastic
Price:
$38.99.
|
|
|
Switchback Commuter Bag - Willie and Max
Description:
Switchback Commuter/Lap Top Bag by Willie & Max
Modular luggage system that adapts to all riding situations
1680 Polyester construction with molded carry handled, shoulder strap, rain covers, and non-slip base for secure mounting
All switchback luggage will attach to each other for many storage configurations to suit your needs
Reinforced with ABS plastic
Price:
$82.99.
|
|
|
Raptor Compact Slant Saddlebags - Willie and Max
Description:
Compact Slant Raptor Saddlebags from Willie and Max
Black synthetic leather; clean lines and uncluttered styling
Quick-release, locking buckles
Zippered yoke assemblies and convenient removable carrying handle
Carry handle is unique in that you can carry both bags with one handle
Adjustable center yoke and internal plastic stiffeners
Made in the U.S.A.
Measures- 12'' W x 9 1/2'' H x 5 1/2'' D.
Price:
$100.99.
|
|
|
Subframe - AC Racing
Description:
Replace your heavy O.E.M. subframe with aluminum for a racer-fast look
Exact duplicate of the stock subframe, except built with 100% aluminum
Built from square or round tubing for a perfect O.E.M. bolt-on match
Mounting points and lugs are made of CNC-bent, 6061 billet for quality and accuracy
Stainless steel threaded inserts are used to prevent rusting and prolonged thread wear
Heat treated for maximum strength
Price:
$218.99.
|
|
|
Raptor Super Slant Saddlebags - Willie and Max
Description:
Raptor Super Slant Saddlebags from Willie and Max
Black synthetic leather; clean lines and uncluttered styling
Quick-release, locking buckles
Zippered yoke assemblies and convenient removable carrying handle
Carry handle is unique in that you can carry both bags with one handle
Adjustable center yoke and internal plastic stiffeners
Made in the U.S.A.
Measures- 16'' W x 11'' H x 6 1/2'' D.
Price:
$139.99.
|
|
|
Visor for Sparx FC-07 Helmets - SparX
Description:
Visor for Sparx FC-07 Helmets
Price:
$23.95.
|
|
|
D-Section Exhaust System - BBR
Description: Do you want the absolute highest quality mini-bike exhaust system on the market? The BBR D-Section Exhaust System takes performance to the next level. Every piece of this new exhaust system is handmade in-house at BBR using only the best materials available. These pipes feature a billet end cap carved from solid aluminum block, thin-wall stainless header and heat shield, and our exclusive D-Section design for increased tire clearance and packing volume. The BBR D-Section has put more racers on the podium than any other mini-bike exhaust system on the market.
Features:
Thin-wall stainless steel header and mid-pipe
Lightweight 6061 aluminum muffler
Billet BBR end cap
Stainless steel heat shield
USDA Forest Service approved spark arrestor
BBR quiet core insert included
All stainless steel hardware
Note: CRF150R is available in three different styles: Torque, Race, and Combo.
Torque Header- This exhaust system comes with the standard D-section muffler with a header that is specifically made to produce a hard hitting bottom end.
Race Header- This exhaust system comes with the standard D-section muffler with a header that is specifically made to create power in the high RPM’s
Combo- This exhaust system comes with the standard D-section muffler and both the torque and race header.
Click Here for Additional Exhaust Information
Price:
$674.99.
|
|
|
FLO Oil Filter - PC Racing
Description: PC Racing's FLO Stainless Steel, Reusable Oil Filter
This should be the last oil filter you will ever buy! Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. A stainless filter catches items down to 35 microns, which is about 3 times better than most good paper or brass filters. Unlike glued paper filters, the FLO Oil Filter pleat seam is welded and able to withstand up to 600 degrees.
This filter maintains consistent flow under all conditions including extreme heat, the presence of water, and cold start ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine!
This high tech filter technology is widely used in all types of auto racing including NASCAR, Indy type cars, Formula 1 and in the Aerospace industry where filtration is of the utmost importance.
**Note: Husaberg and KTM models that have 2 oil filters are listed as "Standard" for the Front Tall Filter and "Secondary Filter" for the Rear Short Filter
Price:
$26.99.
|
|
|
Flo-X Air Filters - PC Racing
Description: PC Racing's new FLO® X Filters have a patent-pending design that includes two Foam Filterskins®. The main filter incorporates a bonded two layer precision foam and proper density for maximum performance and filtration. Additionally, FLO® X Air Filters now come with 2 foam Filterskins® to make the task of cleaning the filter as easy as peeling off the dirty Filterskin®! It is like having 3 filters in one, and you don't have to loosen the wing nut to remove the Filterskin®. Additionally, the foam Filterskin® fits tight and is very thin and porous so that air flow is not restricted. With 3 uses out of one FLO® X Air Filter, riders don't have to sacrifice quality for convenience as the main filter and Foam Filterskins® are made with the highest quality materials to last for years.
Price:
$22.99.
|
|
|
D-Section Big Bore Exhaust System - BBR
Description: Do you want the absolute highest quality mini-bike exhaust system on the market? The BBR D-Section Exhaust System takes performance to the next level. Every piece of this new exhaust system is handmade in-house at BBR using only the best materials available. These pipes feature a billet end cap carved from solid aluminum block, thin-wall stainless header and heat shield, and our exclusive D-Section design for increased tire clearance and packing volume. The BBR D-Section has put more racers on the podium than any other mini-bike exhaust system on the market.
Thin-wall stainless steel header and mid-pipe
Lightweight 6061 aluminum D-Section muffler
Billet BBR endcap
Stainless steel heat shield
USDA Forest Service approved spark arrester
BBR quiet core insert included
All stainless-steel hardware
Big Bore version recommended for 88cc or larger on XR/CRF, and TTR 50
Big Bore version recommended for 143cc or larger on KLX/DRZ 110
Click Here for Additional Exhaust Information
Price:
$305.99.
|
|
|
D2 Big Bore Exhaust System - BBR
Description: All new for 2008. BBR introduces the next generation in D-Section
exhaust system, the D2. This all new design incorporated air-craft
quality stainless steel header and mid-pipes that have been tuned
specifically for each model to optimize performance and power gains.
An all new, lightweight “D” profile muffler is used to dramatically reduce weight on all models.
BBR’s unique “D” muffler also allows for maximum
tire clearance and packing volume. For all applications, the new BBR
D2, come as a complete system including header and muffler. A USDA
Forest Service approved spark arrester is also included. If you need to
reduce the db lever, BBR offers an optional Quiet Insert that will keep
the neighbors happy.
Features:
Thin-wall stainless steel header and mid-pipe
Lightweight 6061 aluminum D-Section muffler
Stainless steel heat shield
USDA Forest Service approved spark arrestor
All stainless-steel hardware
Click Here for Additional Exhaust Information
Price:
$269.99.
|
|
|
V.A.L.E. M-7 Slip On Exhaust - Two Brothers Racing
Description: Stainless steel slip tube with brushed aluminum alloy canister. Experience increased throttle response, more power throughout the powerband, and lighter weight.
The Two Brothers M7 off-road exhaust systems come complete with a U.S. Forestry Service approved removable screen type spark arrestor.
Features:
Our new M7 V.A.L.E.™ exhaust systems feature our exclusive Teflon coated, blunted, cast magnesium outlet and our exclusive X-Lite™ retaining ring. These exclusive Two Brother Racing features not only look great, but also significantly reduce the weight of the exhaust system
The V.A.L.E.™ inlet design eliminates the use of springs and creates an adjustable mount that is rock solid when fixed in place. The system also features a precision mandrel bent, thinwall s-bend tube, and for a full system, a header pipe custom fit for each model
Click Here for Additional Exhaust Information
Price:
$332.99.
|
|
|
Exhaust System - BBR
Description: Complete one piece exhaust system from the headpipe to the tailsection. Comes with a removable USDA Forest Service approved spark arrester installed. Ceramic coated, tapered header for power gains through-out the RPM range. Also accepts stock endcap for stock level sound output!
Features:
Billet aluminum endcap
BBR stainless steel heat shield
Forest service approved spark arrester
Ceramic coated
Tapered header
Click Here for Additional Exhaust Information
Price:
$269.99.
|
