Dual Slip-On Exhaust - Mikado, R-77 Dual Slip-On Exhaust - Yoshimura

This site contains about 12,636 documents.

View by:

Title | Category | Popularity | Price

Page: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 40 50 60 70 80 90 100 200 300 400 422

	Rinehart True Dual Exhaust System - Single O2 Sensor Port - Bub Description: Bub Rinehart True Dual Exhaust System Same unique header design as the Softail and Dyna styles to provide the largest power increase of any exhaust system available Includes one oxygen sensor port in the head pipes, which accept closed-loop aftermarket fuel management systems for better performance and reliability Header features multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish. The header pipes include 2 1/4 in. diameter full-length heat shields New black mounting bracket kit holds the rear pipe in the center for more support and less stress New design torque-chamber baffles a rich sound with minimal noise, (96 dB at 2500 rpm) Muffler bodies measure 3 1/2 in. This chromed system is highlighted by polished black anodized billet-aluminum end caps engraved with the Rinehart logo Optional Quiet Baffles reduce exhaust sound and increase engine torque with only a slight loss of horsepower; optional performance baffles open up the exhaust for even greater power and torque gains Sold in pairs Designed and built in the U.S.A. NOTE : FLHX/FLHRS models may require passenger footpeg adjustment NOTE : Will not fit Screamin' Eagle model Click Here for Additional Exhaust Information Price: $886.99.
	Rinehart True Dual Exhaust System - Dual O2 Sensor Port - Bub Description: Bub Rinehart "True Dual" Exhaust System Same unique header design as the Softail and Dyna styles to provide the largest power increase of any exhaust system available Includes dual oxygen sensor ports in the head pipes Header features multi-bend radius technology and stepped size increase: 1 3/4 in. at the head, 1 7/8 in. mid and a 2 in. finish The header pipes include 2 1/4 in. diameter full-length heat shields New mounting bracket kit holds the rear pipe in the center for more support and less stress New design torque-chamber baffles a rich sound with minimal noise, (96 dB at 2500 rpm) Muffler bodies measure 3 1/2 in. This chromed system is highlighted by polished black anodized billet-aluminum end caps engraved with the Rinehart logo Optional 2 1/4 in. ID Quiet Baffles reduce exhaust sound and increase engine torque with only a slight loss of horsepower Optional performance baffles open up the exhaust for even greater power and torque gains Designed and built in the U.S.A. **NOTE : Front header heatshield is required for Screamin Eagle models; allows clearance of brake pedal Click Here for Additional Exhaust Information Price: $886.99.
	Bolt-On Exhaust Canister - Roaring Toyz Description: 3-7 hp increase on most models No remapping of fuel curves required on most models Easy do-it-yourself installation with hand tools, complete detailed instructions and stainless steel hardware Huge weight savings over OEM mufflers Solid billet adapter, CNC machined from 6061 aluminum Highly polished 2-piece billet end caps CNC machined from 6061 Largest standard performance cores in the industry at 2.50? Stainless steel perforated cores for maximum flow and deep exhaust tone 100% pure carbon fiber shells High temp resins for low outside exhaust temperatures Click Here for Additional Exhaust Information Price: $879.99.
	R-77 Dual Slip-On Exhaust - Yoshimura Description: The R-77 Dual Slip-On Exhaust from Yoshimura consists of a trapezoidal-shaped sleeve, maximizing muffler volume, while offering a sharp silhouette to flow with the new body design The innovative Carbon Fiber end-cap is an evolution of the R-55 exhaust, featuring sharp edges for an attractive, eye catching appeal Maximizes torque and usable power for optimum gains throughout the entire powerband Click Here for Additional Exhaust Information Price: $879.99.
	Slip-On Exhaust - Arrow Special Parts Description: Arrow Special Parts has always been distinguishing itself within the exhaust industry for two wheels vehicles for its innovative capabilities and the manufacturing care of its product range, allowing the company to offer to the motorcycle riders the technology directly derived from the experience gained side by side with some of the most prestigious teams in World GP 500 and World Superbike. This is the same philosophy which has been inspiring a new project for the development of an exhaust system equipped with a new silencer called Race Tech. Its appealing design has been studied with the purpose to reduce the dimensions without compromising the inner volume and the capability to limit the noise level. The innovative profile of the race tech is considerably smaller than the traditional silencer shape, thus allowing a noticeable weight reduction. The assembly procedure of the silencers is done on a jig using T.I.G. and M.I.G. welding techniques, and are checked carefully for the optimization of gas flow. An additional feature of the race tech silencer is the shape of the rear end-cap which has been studied to extend the output of the gas exhaust, thus allowing the inconvenience of the counter-pressure. The range of the race-tech silencers include applications for the latest sport-bikes models and is available with carbon fiber, aluminum or titanium shell. All the race-tech silencers can be fitted to the stainless steel collector pipes kit developed by the Arrow R&D technicians. The final result is a full exhaust system which combines the advantage of each single component: the conical and crossing-over of the primary collector pipes, the research for the proper positioning of the compensation chambers having individual design and diameter for each single exhaust model, the lightness and quietness of the new race tech silencer. These are the new standards in terms of quality and performance that Arrow Special Parts has set up in order to offer a product without compromise. Features: Carbon Made of 100% stainless steel and carbon and features a cylindrical cross-section. The couplings among the different elements are checked accurately and optimized to achieve uniform gas flow. The assemblies are made with templates using manual TIG and MIG welding processes, whereas the bushings that couple the cylinder are made of solid machined metal. Improved performance can also be obtained simply by replacing only the end section, while also achieving a significant decrease in weight. Aluminum Embodies all the experience that Arrow has gained in the world of competitive racing. This can be seen in the elliptical cross-section of the main body, which significantly minimizes the lateral dimensions. It is made of stainless steel using only hand workmanship processes, while the body is made of satin-finish anodized aluminum. In order to achieve maximum quality and performance levels, the couplings between the different elements are checked accurately and optimized to achieve uniform gas flow. The assemblies are made with templates using manual TIG and MIG welding processes, whereas the bushings that couple the cylinder are made of solid machined metal. Titanium Titanium lightness and durability are the main features of the most technologically advanced and top performing exhaust silencers range currently available on the market. Arrow’s long term collaboration with the most prestigious GP and World SBK factory teams is the starting point for the development of these silencers. These exhaust kits are manually assembled using under vacuum T.I.G. welding technique in order to assure top quality and durability. The typical weight saving feature of the titanium are combined with professional racing performance standards to offer a silencers range for riders pushing beyond the limits. Click Here for Additional Exhaust Information **Note: Bolt-on canister uses stock mid-pipe Price: $878.99.
	RS-3D Pro Series Full Dual System - Yoshimura Description: Designed specifically for the new Honda CRF250R, the RS-3D utilizes an ultra-trick dual muffler setup that was perfected through hours of research and development making it not only the best looking and sounding exhaust available, but the best performing as well. Muffler shape increases durability and performance from muffler packing Two-stage large race baffle allows optimal performance throughout the rev range Pro Series exhaust features titanium header and mid-pipe construction Pro Series mufflers have glossy carbon fiber or satin-finish titanium muffler sleeve Includes heat shield, spring puller tool and wash plug Click Here for Additional Exhaust Information Price: $875.99.
	Double Eagles Exhaust with SLT - Road Burner Description: The Double Eagles Exhaust System is Road Burners' top of the line exhaust pipe. This innovative exhaust system utilizes 2-1/2" primaries and 3-1/2" muffler canisters, and feature the new Sound Lowering Technology muffler cartridge system, making them the lowest sound pipes that Road Burner offers. Double Eagles have staggered mufflers. This innovative canister system is brand new to the metric cruiser market. Rear muffler extends back to the rear wheel. CNC machined front and rear billet aluminum end caps Available in a classic sleek chrome finish, a ceramic matte "Black Hawk" finish and a chrome/black combo Coating on black hawk finished exhaust is rated to 1450° fahrenheit Shown for a Yamaha 1700 Warrior; actual product may vary from web image Click Here for Additional Exhaust Information Price: $869.95.
	SBK Oval Slip-On Exhaust - Leo Vince Description: Leo Vince SBK Oval Slip-On Exhaust Leo Vince SBK Oval Slip-On Exhausts are extremely well-built with the highest quality components Specifically designed to boost torque and horsepower across the rpm range while producing a rich exhaust note All internals are constructed of stainless steel including welds TIG-welded stainless steel AISI 304 muffler body and fittings End caps, headers, brackets and all fasteners are stainless steel Lighter than stock Largest increase in midrange, more overrev, and no drop off in power allowing you to wring more speed out of every gear Stronger power throughout the range Some models may require some cutting of the stock muffler Actual Product may vary from web image Click Here for Additional Exhaust Information Price: $868.95.
	Dooley Cadillac Exhaust with Smooth Heat Shields - Roadhouse Description: The Dooley exaust system from Roadhouse is modeled after the Classic 2-into-1 exhaust system Dynometer-tested systems produce increased horsepower Produces a meaty exhaust note that's not too loud Slip-fit 34" long, 3 1/2" diameter polished chrome muffler canister with removable baffles and interchangeable tips 2" core for optimum sound and tuning qualities Includes detailed instructions and mounting hardware Actual product may differ from web image Click Here for Additional Exhaust Information Price: $868.95.
	Dooley Fishtail Exhaust with Smooth Heat Shields - Roadhouse Description: The Dooley exaust system from Roadhouse is modeled after the Classic 2-into-1 exhaust system Dynometer-tested systems produce increased horsepower Produces a meaty exhaust note that's not too loud Slip-fit 34" long, 3 1/2" diameter polished chrome muffler canister with removable baffles and interchangeable tips 2" core for optimum sound and tuning qualities Includes detailed instructions and mounting hardware Actual product may differ from web image Click Here for Additional Exhaust Information Price: $868.95.
	530 Sigma High-Performance Nickel Plated O-Ring Chain - Tsubaki Description: Average tensile strength of 10,600 lbs. Recommended for up to 1200cc Up to 100% greater fatigue strength and wear resistance than most conventional motorcycle drive chains High viscosity grease is vacuum injected and sealed by Tsubaki's super seal o-rings Vital parts are heat treated and shot-peened for maximum durability Rustless nickel plate finish for show quality Ideal for show bikes with big inch motors Price: $859.99.
	Oval Titanium Race Slip-On Exhaust-High Mount - Harris Performance Description: Titanium silencer body offering weight savings, durability and performance Noise filtration aspect incorporates the latest technology of both design and components Fits onto the standard exhaust manifold pipe using O.E. parts Some kits include a polished stainless steel joining tube and genuine O.E. replacement collector-tube-to-silencer gasket Click Here for Additional Exhaust Information Price: $857.14.
	Oval Titanium Moto GP Replica Exhaust - Harris Performance Description: Titanium silencer body offering weight savings, durability and performance Noise filtration aspect incorporates the latest technology of both design and components Fits onto the standard exhaust manifold pipe using O.E. parts Some kits include a polished stainless steel joining tube and genuine O.E. replacement collector-tube-to-silencer gasket Click Here for Additional Exhaust Information Price: $857.14.
	Ti-4 Dual Slip-On Exhaust - Pro Circuit Description: Ti-4 Dual Slip-On Exhaust utilizes lightweight aerospace titanium for superior weight savings Provides lightening quick throttle response, stronger response during hard acceleration and increased horsepower across the powerband Modular end cap allows for tunable power to personal preference and riding conditions U.S. Forest Service approved spark arrestor that can be removed for closed course racing Steel Allen head screws make repacking an easy task Exclusive Pro Circuit E-glass pillow packing Click Here for Additional Exhaust Information Price: $854.99.
	Ti-4 Dual Exhaust System - Pro Circuit Description: Pro Circuit exhaust systems for four-stroke engines are the top choice of ATV riders today. The product of state-of-the-art technology and extensive real-world testing, the Pro Circuit four-stroke systems boost over-all performance with explosive bottom, mid-range and peak power. Because they're constructed to withstand even the most abusive conditions, these systems are sure to give you years of unrivaled performance off-road or on the track. Features: Inspired by the T-4, the Ti-4 system utilizes high-quality grade-two aerospace titanium to provide huge weight savings and unique highlights Extensively track- and dyno-tested Steel Allen head screws make repacking an easy task CNC-machined modular end-cap design provides tunable power, with effortless reshaping to the machine's powerband Top-quality construction assures long life Silencers include spark arrestors that can be removed for closed-course racing; silencer is easy to remove or clean, is completely re-buildable and resists burnout prone to other four-stroke systems Exclusive E-glass pillow packing Can be used with OEM stock or a Pro Circuit header Click Here for Additional Exhaust Information Price: $854.99.
	Low Exit Megaphone Exhaust System - Roaring Toyz Description: Custom and Moto GP inspired look Lightweight thin gauge 304 stainless steel tubes slip into hand built merge style collectors Racing style spring mounted retainers for headpipes and collectors insure easy installation/removal CNC billet flange connectors with smooth mandrel bends that merge 4-2-1 Polished slash cut megaphone with 2 removable innercore baffles for 3 sound levels Fits them all ? bolt on to stock, extended or ?Phat? rear tire conversion swingarms Huge weight savings Detailed instructions included Click Here for Additional Exhaust Information Price: $849.99.
	R-Course Wind Pro One-Piece Suit - Spidi Description: When designing its race suits Spidi spares no effort or expense in ensuring the highest quality, greatest mobility, lightest weight and most protective CE certified protection systems are incorporated into its garments. Spidi works in close association with its leather tanneries in order to achieve the desired technical results from the thinnest possible leather, 1.2mm premium Italian top grain leather for most Spidi items versus the thicker, heavier, cheaper 1.5-1.6mm thick cowhide leather that other manufactures must use to achieve the same technical results. The Spidi Safety Lab technicians then go to work adding their experience and know how to the various other elements of the suit. The results are the finest line of suits in the world, Spidi! Features: Optional .5 liter drink system can be installed in the full size race back hump CE certified Biomechanic shoulder and elbow guards, the industries highest rated protection system Internal pocket for an optional Warrior spine guard to be installed Constructed from 1.2mm premium Italian top grain leather Elasticized areas around the knees, shoulders blades, and lumbar area Removable pre-shrunk polyester liner Schoeller Keprotec throughout the arms, crotch, inner thigh area and the rear of the knees/calves for added flexibility as well as breathability Additional foam padding is placed in the tailbone and shoulder blade areas Bi-phase knee sliders Two inner pockets Neoprene cuffs and collar inserts to increase comfort Venting is handled via perforated leather in the chest, stomach, upper arm, inner calf and thigh areas **Note: R-Course Customizing Kit - The R-Course Customization kit includes numbers, letters and graphics, created to YOUR specs. Here's how it works: when you receive your R-Course suit, you'll receive a secret link to Spidi's R-Course customizing page. Simply fill out the information on line and Spidi Italy will mail your Customizing Kit. You will receive your custom graphics, numbers and name, with instructions on how to apply them (it's easy to do) plus it's FREE ! Exchange only on closeout items Product limited to stock on hand Price: $849.99.
	V.A.L.E. M-2 Slip-On Exhaust - Two Brothers Racing Description: M-2 Slip-On from Two Brothers Racing featuring the V.A.L.E. System which eliminates the need for springs, resulting in a more secure mounting. Allows the muffler assembly to be positioned perfectly on the bike before all the mounting hardware is fully tightened. After perfectly aligned, the V.A.L.E. assembly locks the muffler canister to the exhaust tube assuring a perfect, leak-free fit The M-2 Slip-On exhaust canisters feature the highest level of quality construction and are designed to be fully serviceable in the event of damage, routine maintenance or the occasional repack. Two Brothers Racing’s M series spring-mounted slip-on canisters all feature patented and exclusive lightweight thinwall die cast aluminum one-piece inlets. The exhaust note produced by all Two Brothers Top Level exhaust systems is best described as being deep and throaty without suffering from the shrill whine normally associated with other manufacturer’s straight through muffler canisters. The slip-on type of system replaces your existing “s-bend” pipe and exhaust canister. Two Brothers s-bends are manufactured from .035” thinwall stainless steel. They then polish them to a mirror finish. They use only #304 stainless which will never rust. Features: Small, vertical, oval canister (4.85”H x 3.75”W) is available with an aluminum high-polish finish, black carbon fiber (filament wound) or natural titanium matte-grey color 2.25” stainless steel, power core Packing consists of a first stage (stainless steel wool) and a second stage (high-temperature fiberglass) Comes with a billet, anodized, aluminum-inlet endcap Teflon coated, die-cast, magnesium-outlet endcap Polished Aluminum Aluminum is a lightweight and strong material used extensively in the aerospace, automotive, and of course, motorcycle industries. Aluminum is a wise choice due to its excellent strength to weight ratio, corrosion resistance, and clean look. We use lightweight thin-wall .060” extruded 6061 aluminum alloy that is heat treated to a T-6 condition for increased strength, durability, hardness, and finish hold. After the aluminum has been heat treated, it is cut to length and given a mirror polished finish. Ounce for ounce, aluminum is the best value of all the M and C series mufflers. As a rule the aluminum mufflers weigh about 8.3oz. more than Titanium or Carbon Fiber mufflers. Carbon Fiber Two Brothers has been using Carbon Fiber in motorcycle mufflers since 1992. They are currently the only US Company to exclusively use Filament Wound Carbon Fiber (FWCF) on every carbon fiber muffler they sell. They draw on only the best high temperature resins, and control a proprietary lining system adopted from spacecraft, for additional heat resistance. The FWCF is continuously wound over a precision machined mandrel for a 100% seamless bond. The FWCF tube is then cured in a high temperature autoclave oven for superior strength and heat resistance. These crucial elements meld to form a precision lightweight muffler that will perform as well as it looks. Titanium By weight titanium is one of the world’s strongest readily available metals, making it ideal for the M series mufflers. It is 45% lighter than steel with comparable strength, and twice as strong as aluminum while being only 60% heavier. That’s right, titanium is HEAVIER than aluminum, but since it is twice as strong they are able to use very thin (.024”) material to construct the Titanium muffler. The result is a muffler that is about 8.30z lighter than the M or C series aluminum mufflers. Titanium has become an industry standard for motorcycle mufflers due to its durability, corrosion resistance, light weight, and factory look. **Note: VFR800fi slip-on features the P1 Power Tip, a straight-through sound diffuser that quiets the pipe by 2 to 3 dB while actually adding measurable HP gains at the top of the powerband. Click Here for Additional Exhaust Information Price: $845.99.
	R-22 Bling Exhaust System - Yoshimura Description: Yoshimura designed the R-22 Bling Exhaust System to make power the first priority, then went an extra step and added incredible styling as well System really opens up the exhaust, letting your bike put out extra horsepower Polished stainless steel headers have a show-bike quality finish and weigh less than OEM header pipes Chrome Tri-Oval exhaust muffler adds ground clearance and a touch of class Chrome Tri-Oval end cap features functional air vents that help dissipate hot muffler gasses for increased performance Actual product may vary from web image Click Here for Additional Exhaust Information Price: $839.99.
	RS-5 Stainless Steel Exhaust System - Yoshimura Description: The RS-5 is one of Yoshimura's most unique exhaust systems to date. With durable, high-grade stainless steel headers and mid-pipe, trick cone-shaped end cap, and a stainless steel, titanium or carbon fiber sleeve, you can't go wrong! Click Here for Additional Exhaust Information Price: $839.99.
	RT-One Slip-On Exhaust with Race Baffle - Jardine Description: All the great features of the RT-One slip-ons and bolt-ons with a free-flowing race-style baffle Boost power over a wide rpm band Available with street-oriented or free-flowing racing baffle Dyno-tested for smooth power delivery and superior performance Available with polished aluminum, carbon fiber or titanium canisters Designed with experience gained as exhaust supplier to American Honda's road race team Comes complete with CNC-machined billet clamp and stainless steel collector pipe (if required) Slip-on or bolt-on application depending upon bike model Actual product may vary from web image Click Here for Additional Exhaust Information Price: $835.99.
	BUB 7 True Dual Exhaust Systems with Cross-Over - Bub Description: BUB 7 True Dual Exhaust Systems with Cross-Over Inspired by the worlds fastest motorcycle, BUB 7 True Dual exhaust features stepped header technology running from 1 7/8 in. to 2 in.; systems are available with a crossover tube for bottom-end and mid-range performance boosts or without a crossover for mid-range and top-end performance 2 1/4 in., 220 degree full-coverage heat shields for a non-blueing shine Front heat shield proudly wears a die-stamped BUB 7 logo Uniquely-styled 3 1/2 in. mufflers finish with slash-cut end caps; muffler bodies can be installed with the end cap in the slash-up or slash-down position Include dual O2 sensor ports that accept OEM or aftermarket closed-loop fuel-management systems Made in the U.S.A. Click Here For BUB 7 True Dual Exhaust Without Cross Over Tube Click Here for Additional Exhaust Information Price: $823.99.
	Race Bodyworks Full Set - Hotbodies Racing Description: The Race Bodywork from Hotbodies Racing features: Flexible, durable, and lightweight bodywork; up to 7lbs. lighter than other leading brands All kits include clear supersport windscreen Four-harness fiberglass cloth increases durability, reduces weight and adds structural integrity Extremely flexible; eases installation and minimizes crash damage Leading edges and mounting seems are triple reinforced All mounting bosses are reinforced with carbon fiber AMA-legal with oil-containment lower belly pan, Grey primered outside and black primered inside. Kits contain upper, lower, tail section, fender and windscreen Actual product may vary from web image Price: $815.99.
	Dual Slip-On Exhaust - Mikado Description: Mikado slip-on exhausts feature 27 years of speed, style and product excellence Unique styling and race tested Created with the highest-quality, machine-polished 6061 machined billet aluminum inlet and outlet covers Mounts on both sides Maximum cornering clearance is produced by a distinctive silencer shape An interior velocity chamber is incorporated in the silencer to help achieve greater exhaust flow and to create better overall performance Unwanted sound is eliminated with the large 2in. or 2 1/4in. performance core and two-stage sound suppression system which uses a woven stainless steel blanket over the performance tube Unattractive screw heads and pop rivet ends on the silencer housing are eliminated by the modular assembly Actual product may vary from web image Click Here for Additional Exhaust Information Price: $814.95.
	Slip-On Exhaust-Mid-Pipe Required - Arrow Special Parts Description: Arrow Special Parts of the silencers is done on a jig using T.I.G. and M.I.G. welding techniques, and are checked carefully for the optimization of gas flow. An additional feature of the race tech silencer is the shape of the rear end-cap which has been studied to extend the output of the gas exhaust, thus allowing the inconvenience of the counter-pressure. The range of the race-tech silencers include applications for the latest sport-bikes models and is available with carbon fiber, aluminum or titanium shell. These are the new standards in terms of quality and performance that Arrow Special Parts has set up in order to offer a product without compromise. Features: Carbon Fiber: Made of 100% stainless steel and carbon and features a cylindrical cross-section. The couplings among the different elements are checked accurately and optimized to achieve uniform gas flow. The assemblies are made with templates using manual TIG and MIG welding processes, whereas the bushings that couple the cylinder are made of solid machined metal. Improved performance can also be obtained simply by replacing only the end section, while also achieving a significant decrease in weight. Aluminum: Embodies all the experience that Arrow has gained in the world of competitive racing. This can be seen in the elliptical cross-section of the main body, which significantly minimizes the lateral dimensions. It is made of stainless steel using only hand workmanship processes, while the body is made of satin-finish anodized aluminum. In order to achieve maximum quality and performance levels, the couplings between the different elements are checked accurately and optimized to achieve uniform gas flow. The assemblies are made with templates using manual TIG and MIG welding processes, whereas the bushings that couple the cylinder are made of solid machined metal. Titanium: Titanium lightness and durability are the main features of the most technologically advanced and top performing exhaust silencers range currently available on the market. Arrow’s long term collaboration with the most prestigious GP and World SBK factory teams is the starting point for the development of these silencers. These exhaust kits are manually assembled using under vacuum T.I.G. welding technique in order to assure top quality and durability. The typical weight saving feature of the titanium are combined with professional racing performance standards to offer a silencers range for riders pushing beyond the limits. Click Here for Additional Exhaust Information Price: $811.99.
	V.A.L.E. M-5 Slip-On Exhaust - Two Brothers Racing Description: The M-5 Slip-On from Two Brothers Racing featuring the V.A.L.E.™ System which eliminates the need for springs, resulting in a more secure mounting. Allows the muffler assembly to be positioned perfectly on the bike before all the mounting hardware is fully tightened. After perfectly aligned, the V.A.L.E.™ assembly locks the muffler canister to the exhaust tube assuring a perfect, leak-free fit. The M-5 Slip-On exhaust canisters feature the highest level of quality construction and are designed to be fully serviceable in the event of damage, routine maintenance or the occasional repack. Two Brothers Racing’s M series spring-mounted slip-on canisters all feature patented and exclusive lightweight thinwall die cast aluminum one-piece inlets. The exhaust note produced by all Two Brothers Top Level exhaust systems is best described as being deep and throaty without suffering from the shrill whine normally associated with other manufacturer’s straight through muffler canisters. The slip-on type of system replaces your existing “s-bend” pipe and exhaust canister. Two Brothers s-bends are manufactured from .035” thinwall stainless steel. They then polish them to a mirror finish. They use only #304 stainless which will never rust. Features: Large, horizontal, oval canister (5.375”H x 4”W) is available with a black carbon fiber (filament wound) or natural titanium matte-grey color 2.25” stainless steel, power core Packing consists of a first stage (stainless steel wool) and a second stage (high-temperature fiberglass) Comes with a billet, anodized, aluminum-inlet endcap Teflon coated, die-cast, magnesium-outlet endcap Note: 1999-2007 Hayabusa is Dual "Shorty" slip on. Carbon Fiber Two Brothers has been using Carbon Fiber in motorcycle mufflers since 1992. They are currently the only US Company to exclusively use Filament Wound Carbon Fiber (FWCF) on every carbon fiber muffler they sell. They draw on only the best high temperature resins, and control a proprietary lining system adopted from spacecraft, for additional heat resistance. The FWCF is continuously wound over a precision machined mandrel for a 100% seamless bond. The FWCF tube is then cured in a high temperature autoclave oven for superior strength and heat resistance. These crucial elements meld to form a precision lightweight muffler that will perform as well as it looks. Titanium By weight titanium is one of the world’s strongest readily available metals, making it ideal for the M series mufflers. It is 45% lighter than steel with comparable strength, and twice as strong as aluminum while being only 60% heavier. That’s right, titanium is HEAVIER than aluminum, but since it is twice as strong they are able to use very thin (.024”) material to construct the Titanium muffler. The result is a muffler that is about 8.30z lighter than the M or C series aluminum mufflers. Titanium has become an industry standard for motorcycle mufflers due to its durability, corrosion resistance, light weight, and factory look. Click Here for Additional Exhaust Information Price: $809.99.
	Undertail Exhaust System - Hotbodies Racing Description: The Undertail Exhaust System from Hotbodies Racing features: Grand Prix-inspired slip-on exhaust systems that hide in the ABS plastic undertail Ceramic-coated pipe snakes into the tail section and connects to the completely hidden canister Exhaust tip protrudes from undertail between the LED turn signals Ceramic-coated pipes and canister keep the exhaust moving, which translates to more horsepower, at least 4hp, and a running temp that's 20% lower than stainless steel systems Improve aerodynamics by lowering drag Kit includes undertail, mid-pipe, canister, heat shielding, battery box and all mounting hardware Actual Product may vary from web image Click Here for Additional Exhaust Information Exchange only on closeout items Product limited to stock on hand Price: $809.99.
	Ti-4 GP Low Boy Exhaust System - Pro Circuit Description: Pro Circuit's newest systems offer top-of-the-line performance and power Complete systems from front to back utilize high-quality grade-two aerospace titanium throughout to provide huge weight savings and unique highlights Packed with performance features tailored to the demands of serious racers and developed to lower and centralize the machine's center of gravity, which improves handling and critical clearances In addition to an instant hook-up under power, the systems also offer huge horsepower gains across the rpm range Each model has been rigorously track and dyno-tested to yield peak performance Note: CRF250R is a conversion to a single pipe instead of the OEM dual System Click Here for Ti-4 GP Low Boy Dual Exhaust System Click Here for Additional Exhaust Information Price: $809.99.
	Bag Daddies Exhaust Systems - Martin Bros. Description: Martin Bros. Bag Daddies Exhaust Systems Add flare and style to your ride with this all new system from Martin Bros. 2 into 1 type system Full heat shields 3-1/2" rear section Built in baffle system Bolt on application O2 bungs O.E.M. style mount Available in black and chrome FL and Softail applications Click Here for Additional Exhaust Information Price: $799.99.
	Fat Daddies Exhaust Systems - Martin Bros. Description: Martin Bros. Fat Daddies Exhaust Systems Add flare and style to your ride with this all new system from Martin Bros. 2 into 1 type system Full heat shields 3-1/2" rear section Built in baffle system Bolt on application O2 bungs O.E.M. style mount Available in black and chrome FL and Softail applications Click Here for Additional Exhaust Information Price: $799.99.