|
|
Steering Dampers - Ohlins
Description:
Oil in the damper is kept under pressure to avoid free play
Three different systems give you smooth damping in all conditions
Base damping gives 16 adjustable settings (clicks) for maximum tunability and control
Dampers mount across upper triple clamp, unless noted in chart
Ohlins steering damper kits for specific bike models come with all necessary mounting hardware
Price:
$636.95.
|
|
|
280cc Big Bore Cylinder Kit - Athena
Description: Athena 280cc Big Bore Cylinder Kit
Bolt on kit, no machining required
Aluminum cylinder with nickel-carbide coating designed with wider water jackets
Complete piston kit, Forged piston with molybdenum coating
Complete top end gasket set
Easy to follow step-by-step installation instructions
Average power gains of 5hp can be seen in most models
Note: Images are for reference only; Images may not show your specific cylinder kit.
Price:
$635.99.
|
|
|
RS-2D Exhaust System - Yoshimura
Description: Yoshimura RS-2D Exhaust System
This high-performance system will get your Rhino ready to charge
Features full stainless steel header pipes and mid pipes
Aluminum muffler sleeves with a brushed aluminum finish
Removable U.S.F.S.- approved 96dB low-volume muffler inserts keep the sound levels down without sacrificing power
Dual muffler design
Price:
$635.99.
|
|
|
Explorer Special Seats - Saddlemen
Description:
Designed and contoured for two-up touring comfort; match all studded saddlebags and luggage
Split-cushion design separates seating surface from lumbar support, reducing tail bone and back pressure
Some available with removable and adjustable driver?s backrest which is adjustable for both height and fore-aft position
SaddleGel? is featured in both front and rear
SaddleHyde? cover offers a combination of comfort, glove-soft leathery feel and weatherproof, no-maintenance good looks; leather where indicated
Also features 1/2? chrome-plated rust resistant brass studs which follow a special stitch pattern
Made in the U.S.A.
Price:
$629.99.
|
|
|
Swept Exhaust - Cobra
Description:
Curved lines of the exhaust pipes echo the sweeping top line of motorcycles
Deep rumbling sound for a touch of attention
Includes Cobra PowerPort for increased low and mid-range power
Includes 1 3/4" head pipes and full-length 2 3/4" heat shields to give the pipes the correct proportional look; heat shields will not discolor
Removable power cores
Made in the U.S.A.
Price:
$629.99.
|
|
|
10 Battery Management System - Battery Tender
Description:
Charges and maintains up to Ten batteries simultaneously
Absolutely no chance of overcharging or overheating a battery
Charge will not operate if battery is connected incorrectly, causing no damage
State of charge lights for each battery
5 year warranty
Price:
$629.99.
|
|
|
2.75in. K2 Exhaust System - Hard Krome
Description:
All Hard-Krome systems feature patented True Doublewall™ construction preventing discoloration.
Designed for the aggressive rider who is looking for performance with an edge
Pipes kick up for better ground clearance
Outer pipe measures 2 3/4 in. diameter and comes with straight-cut Hard-Tips billet end caps
Polished chrome finish
Actual product may vary from web image
Click Here for Additional Exhaust Information
Price:
$629.99.
|
|
|
T-4 Dual Slip-On Exhaust with Mid-Pipe - Pro Circuit
Description: Pro Circuit T-4 Dual Slip-On Exhaust with Mid-Pipe
Improved power delivery and exhaust note
Body is made from lightweight 6061 T-6 brushed aluminum and the end cap and intake tube are stainless steel
Tunable end caps allow fine-tuning of power delivery for different types of riding and terrain
Silencers include wire-meshed spark arrestor that can be removed for closed-course racing
Steel Allen head screws make re-packing an easy task
Exclusive E-glass pillow packing
Click Here for Additional Exhaust Information
Price:
$629.99.
|
|
|
Bull Dawgs Exhaust System - Samson
Description: Samson Bull Dawgs Exhaust System
These are the original, innovative styles that put Samson on the map. Loud and proud, these pipes still have that signature sound that stands out in the crowd but now are finished with Samson’s exclusive Quad Chrome plating process that provides ultimate adhesion and corrosion protection.
3" Billet End Cap
3" Muffler
Awesome Deep Tone
Improves Power and Torque
Installer Friendly
Limited 1 year warranty
Mounting hardware included
O2 sensor ports accept O.E.M. / Aftermarket sensors
Removable Baffles
2-1/2"removable heatshield
Click Here for Additional Exhaust Information
Price:
$629.99.
|
|
|
2.75in. Big Straights Exhaust System - Hard Krome
Description:
All Hard-Krome systems feature patented True Doublewall™ construction preventing discoloration
Let the world know you mean business with these large diameter Big Straights drag pipes exhaust.
Outer pipe measures 2 3/4 in. diameter; 1 3/4 in. inside pipe diameter
CNC-machined straight-cut Hard-Tips billet end caps included
Customize with optional CNC-machined Hard-Tip end caps
Optional Straight-thru baffles
Replacement standard Spiral type baffles
Polished chrome finish
Includes Boost Port technology - Boost Port is a system that connects two exhaust pipes together
Actual product may vary from web image
Click Here for Additional Exhaust Information
Price:
$629.99.
|
|
|
E-6 Fork Assembly - BBR
Description: BBR E-6 forks are designed and purpose built for adults and fast riders. This conventional style fork offers a full 6" of travel. Features include dual bushings, chrome-moly fork tubes, a dual pinch bolt triple clamp design, and optional ti-nitride coated chrome-moly fork tubes
Oil dampened 30mm conventional style forks
6" of travel
Available with Ti Nitride coating on the tubes;Ti Nitride coating makes fork travel smooth and minimizes stiction
Fits stock and aftermarket frames
Easy to install
See "Kit Includes" reference below to see the parts list for your motorcycle application
Kit Includes:
CRF/XR50= Forks, black anodized machined billet triple clamp set w/ aluminum stem, tapered steering bearings and extended brake cable (For use with stock front wheel and brake)
KLX/DRZ110 = Forks and extended brake line only (For use with stock front wheel, axle, brake, and triple clamps)
Price:
$629.99.
|
|
|
T4 Dual Exhaust System - Pro Circuit
Description: Pro Circuit exhaust systems for four-stroke engines are the top choice of ATV riders today. The product of state-of-the-art technology and extensive real-world testing, the Pro Circuit four-stroke systems boost over-all performance with explosive bottom, mid-range and peak power. Because they're constructed to withstand even the most abusive conditions, these systems are sure to give you years of unrivaled performance off-road or on the track.
Features:
Improves performance and exhaust note; adds power over the entire rpm range
Tunable end caps allow fine-tuning of power delivery for different types of riding and terrain
Top-quality construction assures long life
High-quality stainless steel and aluminum construction eliminates rust problems
Machined aluminum end caps
Silencers include spark arrestors that can be removed for closed-course racing; silencer is easy to remove or clean, is completely re-buildable and resists burn out prone to other four-stroke systems
System contains silencer and head pipe
Click Here for Additional Exhaust Information
Price:
$629.99.
|
|
|
Ray Price Limited Edition Collector Series - Caliber High Performance
Description: Caliber High Performance Ray Price Limited Edition Collector Series
These high performance pipes deliver superb low end torque, strong mid-range power and excellent horsepower improvements. The complete system includes full coverage heat shields, baffle, and all mounting hardware. The smooth flowing lines are evidence of careful planning and an eye for good looks. This system is unquestionably the best looking 2 into 1 exhaust in the industry. Extensive Dyno testing proves that this system puts the power to the road with significant increases in horsepower and torque. Caliber systems are offered with or without 02 sensor ports.
Awesome Deep Tone
Exclusive Show Quality Quad Chrome Finish
Full coverage black ceramic heatshield
Improves gas mileage
Includes removable Varitech baffles
Installer Friendly
Limited 2 year warranty
Made with High Grade Mild Steel
Mounting hardware included
O2 sensor ports accept O.E.M. / Aftermarket sensors
Produces up to 20% more horsepower
Click Here for Additional Exhaust Information
Price:
$629.95.
|
|
|
Jug Huggers Exhaust System - Bub
Description: The Jug Huggers Exhaust System from Bub features:
Turn-down-style exhaust with stepped header technology
Unique header comes with a baffle chamber designed for tunable back pressure and air flow with an adjustable sound
Sophisticated removable high-flow baffles create the most torque of any baffles tested by BUB
Optional chrome billet end caps are available for a classic look and finish (sold separately)
Made in the USA
Actual Product may vary from web image
Click Here for Additional Exhaust Information
Price:
$629.95.
|
|
|
SSR Rearsets - CRG
Description:
Fully CNC-milled rearsets with GP-style footpegs feature an extremely aggressive grip pattern and an undercut design
Oversized needle bearing pivots in brake and shift pedals for friction-free control actuation
Folding shift and brake tips, and rigid foot pegs for damage protection if tipped over
Infinitely adjustable mounting positions to fit most riders
Fully modular assembly can be set up for conventional or race shift pattern
Available in three anodized colors
Includes stainless steel hardware
Made in the U.S.A.
Price:
$628.95.
|
|
|
440 Series Inertia Shocks - Progressive Suspension
Description:
440 Series Inertia Shocks from Progressive Suspension
Patented Inertia Sensitive damping
2 independent rebound damping circuits, Soft (wheel) and Firm (chassis) circuits
Chrome billet aluminum end covers
Easy adjustable spring pre-load, no tools required
Polyurethane bushings
Powder coat finish on the body
Limited lifetime manufacturer?s warranty on shock and springs
Price:
$628.95.
|
|
|
True Duals with Shorts Fishtail Exhaust - Samson
Description:
Head-pipes are covered with 220 degree heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results
2 1/4" muffler bodies
Intergraded, non-removable, fuel-injection-friendly baffles
Great fishtail look from the people who know fishtails
Made in the U.S.A.
Click Here for Additional Exhaust Information
Price:
$626.99.
|
|
|
True Duals with Long Fishtail Exhaust - Samson
Description:
Head-pipes are covered with 220 degree heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results
2 1/4" muffler bodies
Intergraded, non-removable, fuel-injection-friendly baffles
Great fishtail look from the people who know fishtails
Made in the U.S.A.
Click Here for Additional Exhaust Information
Price:
$626.99.
|
|
|
GP Exhaust Slip-On - Competition Werkes
Description:
New GP style exhaust slip-on from Competition Werkes!
Specs: Dimensions: 12.25" x 5.5"
Inlet Diameter: 1.875"
Outlet Diameter: 3"
Weight: Stainless Steel 17.4 oz /Titanium: 9.3 oz
Click Here for Additional Exhaust Information
Price:
$626.99.
|
|
|
True Duals with Shorts Longtail Exhaust - Samson
Description:
Head-pipes are covered with 220 degree heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results
2 1/4" muffler bodies
Intergraded, non-removable, fuel-injection-friendly baffles
Great fishtail look from the people who know fishtails
Made in the U.S.A.
Click Here for Additional Exhaust Information
Price:
$626.99.
|
|
|
True Duals with Long Longtail Exhaust - Samson
Description:
Head-pipes are covered with 220 degree heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results
2 1/4" muffler bodies
Intergraded, non-removable, fuel-injection-friendly baffles
Great fishtail look from the people who know fishtails
Made in the U.S.A.
Click Here for Additional Exhaust Information
Price:
$626.99.
|
|
|
290cc Big Bore Cylinder Kit - Athena
Description: Athena 290cc Big Bore Cylinder Kit
Bolt on kit, no machining required
Aluminum cylinder with nickel-carbide coating designed with wider water jackets
Complete piston kit, Forged piston with molybdenum coating
Complete top end gasket set
Easy to follow step-by-step installation instructions
Average power gains of 5hp can be seen in most models
Compression ratios are as follows
KX250F Kit has 12.8:1
RMZ250 04-06 Kit has 12.8:1
RMZ250 07 Kit has 12.6:1
YZ/WR250F Kit has 12.5:1
Note: Images are for reference only; Images may not show your specific cylinder kit.
Price:
$625.99.
|
|
|
X-Eleven Kagayama 2 Helmet - Shoei
Description: Shoei X-Eleven Kagayama 2 Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight, Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior, Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Glory Helmet - Shoei
Description: Shoei X-Eleven Glory Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight, Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior, Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Luthi Helmet - Shoei
Description: Shoei X-Eleven Luthi Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight, Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior, Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Elias Replica Helmet - Shoei
Description: The X-ELEVEN has been the helmet of choice for professional riders since it’s introduction. Built to race specifications, the X-Eleven was designed and developed in collaboration with professional riders, like Jake Zemke, Eric BosAtrom, and Chris Vermeulen to name a few. Numerous hours in the wind tunnel and on racetracks around the world has produced an aerodynamically superior helmet with minimal lift and drag, plus incomparable fit and ventilation. The world’s most demanding riders demand nothing but the best. The X-ELEVEN only from Shoei.
Features:
Quick Release Base Plate System
Dual Liner Ventilation System
3D Comfort Liner System
Upper Air Intake
Lower Air Intake
Dual Air Charge System
Face Shield Defogging Vent
Chin Curtain
Rear Air Exhaust
Neck Outlet Vent
Exhaust Breath Chamber
Breath Guard
Aero Edge Spoiler With Exhaust Vent
Preset Shield Opening Lever With Locking Mechanism
CX-1V Shield
AIM+Shell Construction
Snell M2005
5 Year Warranty from Purchase Date. 7 Year Warranty From Helmet Manufacture Date. Whichever comes first
Price:
$623.99.
|
|
|
X-Eleven Locatelli Helmet - Shoei
Description: Shoei X-Eleven Locatelli Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight, Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior, Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Kagayama Replica Helmet - Shoei
Description:
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight,Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior,Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Kiyonari Replica Helmet - Shoei
Description: Shoei X-Eleven Kiyonari Replica Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight,Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior,Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
Price:
$623.99.
|
|
|
X-Eleven Lawson Replica Helmet - Shoei
Description: Shoei X-Eleven Lawson Replica Helmet
Aerodynamic Shell Design
Hyper Dual-Liner II Ventilation System
Lightweight, Advanced Integrated Matrix (AIM)
Anti-Fog System
3D Full Support Interior,Type 3
Standard Chin-Strap Clip
CX-1 V Shield and Lock System
Scratch-resistant coating
100% protection from harmful UV A &B rays
A pre-set lever can easily lock the shield in place to prevent it from opening unexpectedly
Standards: DOT 218, Snell-M2000
Construction: AIM (Advanced Integrated Matrix) materials
Weight: 3.2 lbs /1450 grams (approx.)
**Closeouts are limited to stock on hand**
Price:
$623.99.
|
