|
|
90 Watt Heated Liner Jacket - Firstgear
Description: Firstgear 90 Watt Heated Liner Jacket
Available in sizes for both men and women, Firstgear’s heated jacket liners are wired to work with Firstgear heated gloves. They fit comfortably, operate efficiently, and most importantly, maintain a safe and temperate riding experience. To top it off, a state-of-the-art Heat-troller is also available to vary the output of most other brands of heated apparel better than the original equipment. So instead of winterizing your motocycle, keep it on the road by keeping yourself warm with tried-and-true, Firstgear, Warm & Safe heated apparel.
Firstgear's "no one left behind" policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider, the 65-watt units minimizes the draw on the bike's charging system.
Features:
The Firstgear Heated Liner Jacket is available in 90-watt and 65-watt versions.
Designed to be plugged into a DC power source or battery pack. Heat-trollers available to provide you with multiple ways to control the heat output in your heated gear.
Exclusive dual-zone heating system allows you to use the single or the dual Heat-troller without rewiring the liner. Liner rated at 110 watts at 12.8 volts.
Designed to be worn over a single layer of clothing, a t-shirt or other lightweight garment. A protective outer jacket should always be worn over it.
Built to be temperature neutral, so that you can wear your liner all day and not have to change clothing when you need heat
Lightweight soft nylon shell for minimum bulk, non-coasted finish for maximum breathability
Form fitting, snug fit for optimum heat transfer to body
Heating pads on front, upper and lower back, sleeves and collar for full heat coverage
Integrated glove plugs and pants plug stow in their own zippered pockets when not in use
Flex panels and action back allow a full range of movement for any activity
Fleece inner collar to wick away moisture
Packs into its own zippered pouch; included
Click here to view heated gear accessories
Price:
$179.99.
|
|
|
65 Watt Heated Liner Jacket - Firstgear
Description: Firstgear 65 Watt Heated Liner Jacket
Available in sizes for both men and women, Firstgear’s heated jacket liners are wired to work with Firstgear heated gloves. They fit comfortably, operate efficiently, and most importantly, maintain a safe and temperate riding experience. To top it off, a state-of-the-art Heat-troller is also available to vary the output of most other brands of heated apparel better than the original equipment. So instead of winterizing your motocycle, keep it on the road by keeping yourself warm with tried-and-true, Firstgear, Warm & Safe heated apparel.
Firstgear's "no one left behind" policy ensures that riders of any model motorcycle can take advantage of the warming effects of heated apparel by choosing between either the 65- or 90-watt versions. Good for low-amperage bikes or passengers not requiring as much heat as the rider, the 65-watt units minimizes the draw on the bike's charging system.
Features:
The Firstgear Heated Liner Jacket is available in 90-watt and 65-watt versions.
Designed to be plugged into a DC power source or battery pack. Heat-trollers available to provide you with multiple ways to control the heat output in your heated gear.
Exclusive dual-zone heating system allows you to use the single or the dual Heat-troller without rewiring the liner. Liner rated at 110 watts at 12.8 volts.
Designed to be worn over a single layer of clothing, a t-shirt or other lightweight garment. A protective outer jacket should always be worn over it.
Built to be temperature neutral, so that you can wear your liner all day and not have to change clothing when you need heat
Lightweight soft nylon shell for minimum bulk, non-coasted finish for maximum breathability
Form fitting, snug fit for optimum heat transfer to body
Heating pads on front, upper and lower back, sleeves and collar for full heat coverage
Integrated glove plugs and pants plug stow in their own zippered pockets when not in use
Flex panels and action back allow a full range of movement for any activity
Fleece inner collar to wick away moisture
Packs into its own zippered pouch; included
Click here to view heated gear accessories
Price:
$179.99.
|
|
|
Single Semi-Mounted Heat-Troller - Firstgear
Description:
Firstgear Single Semi-Mounted Heat-Troller™ designed to variably control heat output of multiple connected garments on 1 person such as a jacket liner and gloves
To control temperature of each piece separately use our Dual Heat-Troller™
Each rider must have their own Heat-Troller™
Designed to be mounted without drilling any holes
Hook-and-loop the switch anywhere on a 12-vold DC motorcycle or ATV
Price:
$80.99.
|
|
|
Single Portable Heat-Troller - Firstgear
Description:
Firstgear Single Portable Heat-Trolle™r designed to variably control heat output of 1 or multiple connected garments on 1 person such as a jacket liner and gloves
To control temperature of each piece separately use our Dual Heat-Troller™
Each rider must have their own Heat-Troller™
Portability allows you to use it with more than one 12-volt DC motorcycle or ATV
Price:
$62.99.
|
|
|
Single Mounted Heat-Troller - Firstgear
Description:
Firstgear Single Mounted Heat-Troller™ designed to variably control heat output of multiple connected garments on 1 person such as a jacket liner and gloves
To control temperature of each piece separately use our Dual Heat-Troller™
Each rider must have their own Heat-Troller™
Designed to be mounted to the vehicle
Requires drilling of holes for switch and L.E.D.
Price:
$71.99.
|
|
|
Dual Semi-Mounted Heat-Troller - Firstgear
Description:
Firstgear Dual Semi-Mounted Heat-Troller™ designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves
It can also be used to balance the heat between any set of heated garments, such as jacket liner on 1 control and gloves, pants and socks on the other
Each rider must have their own Heat-Troller™
Designed to be mounted without drilling any holes
Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV
Price:
$125.99.
|
|
|
Dual Portable Heat-Troller - Firstgear
Description:
Firstgear Dual Portable Heat-Troller™ designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves
It can also be used to balance the heat between any set of heated garments, such as jacket liner on 1 control and gloves, pants and socks on the other
Each rider must have their own Heat-Troller™
Portability allows use on more than one 12-volt DC motorcycle or ATV
Price:
$89.99.
|
|
|
Dual Mounted Heat-Troller - Firstgear
Description:
Firstgear Dual Mounted Heat-Troller™ designed for 1 person to variably control heat separately to multiple garments such as a jacket liner and gloves
It can also be used to balance the heat between any set of heated garments, such as jacket liner on 1 control and gloves, pants and socks on the other
Each rider must have their own Heat-Troller™
Designed to be mounted to the vehicle
Requires drilling of holes for switch and L.E.D.
Price:
$107.99.
|
|
|
Single Semi-Mounted Heated Grip Heat-Troller - Firstgear
Description:
Firstgear Single Semi-Mounted Heated Grip Heat-Troller designed to variably control heated grips or thumb-warmer or heated seats
Designed to be mounted to a 12-volt DC vehicle without drilling holes
Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV
Price:
$71.99.
|
|
|
Dual Semi-Mounted Heated Grip Heat-Troller - Firstgear
Description:
Firstgear Dual Semi-Mounted Heated Grip Heat-Troller designed to variably control heated grips or thumb-warmer separately or can be used to control front and rear heated seats
Designed to be mounted to a 12-volt DC vehicle without drilling holes
Hook-and-loop the switch anywhere on a 12-volt DC motorcycle or ATV
Price:
$107.99.
|
|
|
Single Mounted Heated Grip Heat-Troller - Firstgear
Description:
Firstgear Single Mounted Heated Grip Heat-Troller designed to variably control heated grips or thumb-warmer or heated seats
Designed to be mounted to a 12-volt DC vehicle
Requires drilling of holes for switch and L.E.D.
Price:
$53.99.
|
|
|
Dual Mounted Heated Grip Heat-Troller - Firstgear
Description:
Firstgear Dual Mounted Heated Grip Heat-Troller designed to variably control heated grips or thumb-warmer separately or can be used to control front and rear heated seats
Designed to be mounted to a 12-volt DC vehicle
Requires drilling of holes for switch and L.E.D.
Price:
$89.99.
|
|
|
BMW-Style Plug - Firstgear
Description:
Firstgear BMW-Style Plug
Convert your existing heated apparel
For use with a 12-volt motorcycle or ATV using a BMW-style power outlet
Price:
$8.99.
|
|
|
BMW-Style Socket with Cover - Firstgear
Description:
Firstgear BMW-Style Socket with Cover adapts any 12-volt motorcycle or ATV to provide a BMW-style power outlet
Spring-loaded cover keeps dirt out
Price:
$13.99.
|
|
|
6in BMW Socket to DC Coax Plug - Firstgear
Description:
Firstgear 6in BMW Socket to DC Coax Plug installs into dash to provide battery power for a portable Heat-Troller™
Can also be used as the output of a mounted Heat-Troller™ for connecting existing BMW-style plugged apparel
Price:
$15.99.
|
|
|
DC Coax Battery Harness - Firstgear
Description:
Firstgear DC Coax Battery Harness with coax connector and waterproof fuse holder, 15 amp fuse
Price:
$8.99.
|
|
|
6in SAE Connection to DC Coax Jack Adapter - Firstgear
Description:
Firstgear 6in SAE Connection to DC Coax Jack Adapter
Cable with 6 inches of 16 AWG wire and SAE connector
For connecting heated clothing with a coax plug to a SAE Heat-Troller™
Price:
$8.99.
|
|
|
6in SAE Connection to DC Coax Plug Adapter - Firstgear
Description:
Firstgear 6in SAE Connection to DC Coax Plug Adapter
Cable with 6 inches of 16 AWG wire and SAE connector
For plugging a coax Heat-Troller™ to clothing using an SAE connector
Can also be used to plug a battery tender into a portable Heat-Troller™ DC Coax battery harness
Price:
$8.99.
|
|
|
24in Coax Extension Cable - Firstgear
Description:
Firstgear 24in Coax Extension Cable
Adds 24 inches of length between heated apparel and a 12-volt power source
Price:
$11.99.
|
|
|
DC Coax Plug Y-Harness - Firstgear
Description:
Firstgear DC Coax Plug Y-Harness
Required for connecting heated gloves to a Heat-Troller™ without a heated jacket liner
Price:
$13.99.
|
|
|
Portable Heat-Troller Belt Pouch - Firstgear
Description:
Firstgear Portable Heat-Troller ™Belt Pouch
Protects the portable Heat-Troller™ from dust and dirt
Belt clip on back of puch for attaching to a belt or tank bag
Available as single or dual
Price:
$10.99.
|
|
|
Heated Rider Gloves - Firstgear
Description: Firstgear Heated Rider Gloves
There’s nothing worse than trying to operate your bike with cold, numb fingers. Bulky, unheated gloves make things even tougher by reducing feel, reaction time and complicating operation of the controls. Firstgear’s Warm & Safe heated gloves for men and women feature heating throughout the entire glove, while maintaining the thinness of a summer glove. The gloves plug directly into the jacket liner, or an optional separate wire harness, allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-Troller™.
Features:
DC-heated, produces 15 watts of heat at 12.8 Volts (each glove) and should be used with a Firstgear Heat-Troller™ for optimum safety
Grade-A, top-grain, drum-dyed cowhide construction
Porelle® breathable, waterproof membrane
Thinsulate layer
Pre-curved fingers and finger-mounted, rubber faceshield wiper
Elastic writst and adjustable hook-and-loop gauntlet closure
Reinforced protection in palm
Reflective piping on top
Click here to view heated gear accessories
Price:
$116.99.
|
|
|
Carbon Heated Gloves - Firstgear
Description: There’s nothing worse than trying to operate your bike with cold, numb fingers. Bulky, unheated gloves make things even tougher by reducing feel, reaction time and complicating operation of the controls. Firstgear’s Warm & Safe heated gloves for men and women feature heating throughout the entire glove, while maintaining the thinness of a summer glove. The gloves plug directly into the jacket liner, or an optional separate wire harness, allowing riders to adjust the temperature of the gloves independently of the jacket with a Dual Heat-Troller.
Features:
DC-heated, produces 15 watts of heat at 12.8 Volts (each glove) and should be used with a Firstgear Heat-Troller for optimum safety
Grade-A, top-grain, drum-dyed cowhide construction
Porelle® breathable, waterproof membrane
Thinsulate layer
Pre-curved fingers and finger-mounted, rubber, faceshield wiper
Elastic wrist and adjustable hook-and-loop gauntlet closure
Reinforced protection in palm
Reflective piping on top
Click here to view heated gear accessories
Price:
$152.99.
|
