|
|
XR-2 Pivot Kit - AGV
Description:
Replacement pivot kit with screws for the AGV XR-2 helmet
Shapes and sizes may vary according to model of helmet
Price:
$7.99.
|
|
|
Pivot Series 2 Jacket - Tour Master
Description: Tour Master Pivot Series 2 Jacket
The 600 Denier Carbolex and 600 Denier Ballistic Polyester shell incorporates reflective Phoslite material panels for strength and increased nighttime visibility
A waterproof and breathable Rainguard barrier allows dryness without persperation buildup
Collar anchor snap eliminates flapping while collar is open
Waterproof zippered chest vents combine with sleeve vents, rear exit vents and the pipeline ventilation system, providing flow-through ventilation
Durable main zipper closure with dual wind flap seals out the elements
1" wide reflective strip across the back, reflective sleeve piping, Phoslite material panels and Tour Master's signature reflective rear triangle help to increase nighttime visibility
The Microfiber lined collar and cuffs are soft, yet durable
Adjustable sleeve take-up straps at the forearm help to secure elbow armor and material
Removable, CE Approved armor at the elbow and shoulder with an articulated Triple Density back protector
Tour Master's Z.O.Q.
Zip-Out Quilted Liner features warming 100G polyfill insulation
Vertical zippered chest map pockets, zippered hand pockets with flap closure, internal media pocket, dual zippered fanny pack and sleeve key pocket
Adjustable waist belts, with TPR pulls help to fine tune the fit
Includes a jacket/pant zipper attachment with the pant side included
Price:
$143.99.
|
|
|
Web Knee Brace Toolkit - EVS
Description: INCLUDES:
2 Condyle pads
3 hinge adjustment screws and 6 washers
4 knee cup pivots
Price:
$12.99.
|
|
|
AC-12 Carbon Vader Helmet - HJC
Description: Features:
Lightweight Carbon Fiber Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Bottom edge wind deflector offers reduced air intake to the facial area and an additional level of turbulence reduction
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Anti-Fog System
Anti-fog coated shield
2-piece, injection-molded, multi-stage front chin bar vent sculptured to direct fresh air towards shield's interior surface for increased anti-fogging capacity
Removable/Washable AquaTrans Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
AquaTrans liner and cheek pads quickly wick moisture away from the skin
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Open cell internal foam technology for increased air circulation
Cheek pad design for communication system speakers
Nylon Strap-Retention Band
Neatly secures chin strap
3rd Generation 2-Stage Pivot/Compression Shield Closure System
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
HJ-09 Anti-Fog Face Shield
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog scratch-resistant hard coating
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Exceeds VESC-8
Deluxe helmet bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.26 lbs/1480 grams
Price:
$382.99.
|
|
|
AC-12 Carbon Elbowz Helmet - HJC
Description: HJC AC-12 Carbon Elbowz Helmet
Lightweight Carbon Fiber Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Bottom edge wind deflector offers reduced air intake to the facial area and an additional level of turbulence reduction
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Anti-Fog System
Anti-fog coated shield
2-piece, injection-molded, multi-stage front chin bar vent sculptured to direct fresh air towards shield's interior surface for increased anti-fogging capacity
Removable/Washable AquaTrans Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
AquaTrans liner and cheek pads quickly wick moisture away from the skin
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Open cell internal foam technology for increased air circulation
Cheek pad design for communication system speakers
Nylon Strap-Retention Band
3rd Generation 2-Stage Pivot/Compression Shield Closure System
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog scratch-resistant hard coating
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Exceeds VESC-8
Deluxe helmet bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.26 lbs/1480 grams
**Closeouts are limited to stock on hand**
Price:
$395.99.
|
|
|
Women's CL-SP Type O Helmet - HJC
Description: HJC Women's CL-SP Type O Helmet
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Anti-fog coated shield
Chin bar and rear venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable Bioceramic Nylon Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
Bioceramic Nylon liner and cheek pads feature ceramic cell technology to reduce
Prevents odor-causing bacterial buildup
Sculptured cheek pad design for communication system speakers
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Two-Stage Compression Shield Closure System
3rd generation, 2-stage shield pivot/compression system ensuring maximum shield seal
HJ-09 Anti-Fog Face Shield
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog, scratch-resistant hard coating
Optically-correct 3D design
Protection capacity rated to block 95% of harmful UV radiation
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.6 lbs/1640 grams
Exchange only on closeout items
Product limited to stock on hand
Price:
$99.99.
|
|
|
CL-SP Helmet - HJC
Description: Features:
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Anti-fog coated shield
Chin bar and rear venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable Bioceramic Nylon Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
Bioceramic Nylon liner and cheek pads feature ceramic cell technology to reduce
odor-causing bacterial buildup
Sculptured cheek pad design for communication system speakers
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Two-Stage Compression Shield Closure System
3rd generation, 2-stage shield pivot/compression system ensuring maximum shield seal
HJ-09 Anti-Fog Face Shield
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog, scratch-resistant hard coating
Optically-correct 3D design
Protection capacity rated to block 95% of harmful UV radiation
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.6 lbs/1640 grams
Price:
$161.99.
|
|
|
CL-15 Dragon Helmet - HJC
Description: HJC CL-15 Dragon Helmet
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Side chin bar venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable Nylex Interior
Easy to remove Nylex liner and cheek pads for cleaning and air drying
Sculptured wrap-around neck roll reduces wind noise
Padded chin strap design
3rd Generation 2-Stage Pivot/Compression Shield Closure System
HJ-09 anti-fog and scratch resistant hard-coated shield
3rd generation easy function tool-less shield removal system
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
Aerodynamic flush-mounted fit for reduced turbulence noise
Scratch-resistant hard coated shield
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
**Closeouts are limited to stock on hand**
Price:
$99.99.
|
|
|
AC-12 Helmet - HJC
Description:
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Anti-fog coated shield
Chin bar and rear venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable AquaTrans Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
AquaTrans liner and cheek pads quickly wick moisture away from the skin
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Open cell internal foam technology for increased air circulation
Cheek pad design for communication system speakers
Nylon Strap-Retention Band
Neatly secures chin strap
3rd Generation 2-Stage Pivot/Compression Shield Closure System
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
HJ-09 Anti-Fog Face Shield
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog, scratch-resistant hard coating
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Exceeds VESC-8
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.7 lbs/1640 grams
Price:
$206.99.
|
|
|
AC-12 Metallic Helmet - HJC
Description:
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Anti-fog coated shield
Chin bar and rear venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable AquaTrans Interior
Cheek pads and upper liner are easily removed to allow for cleaning and air drying
AquaTrans liner and cheek pads quickly wick moisture away from the skin
Wrap-around neck roll reduces wind noise
Padded chin-strap design
Open cell internal foam technology for increased air circulation
Cheek pad design for communication system speakers
Nylon Strap-Retention Band
Neatly secures chin strap
3rd Generation 2-Stage Pivot/Compression Shield Closure System
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
HJ-09 Anti-Fog Face Shield
Quick and easy, tool-less shield removal
Aerodynamic flush-mounted fit for reduced turbulence
Anti-fog, scratch-resistant hard coating
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Exceeds VESC-8
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.7 lbs/1640 grams
Price:
$206.99.
|
|
|
CL-15 Solid Helmet - HJC
Description: HJC CL-15 Solid Helmet
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Side chin bar venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable Nylex Interior
Easy to remove Nylex liner and cheek pads for cleaning and air drying
Sculptured wrap-around neck roll reduces wind noise
Padded chin strap design
3rd Generation 2-Stage Pivot/Compression Shield Closure System
HJ-09 anti-fog and scratch resistant hard-coated shield
3rd generation easy function tool-less shield removal system
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
Aerodynamic flush-mounted fit for reduced turbulence noise
Scratch-resistant hard coated shield
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.6 lbs/1640 grams
Price:
$125.99.
|
|
|
CL-15 Metallic Helmet - HJC
Description: HJC CL-15 Metallic Helmet
Injection-Molded Polycarbonate Composite Shell Construction
Two-piece channeled Dual-Density lightweight EPS liner
Large eye port opening for greater visibility
Unique CAD generated shell sculpture for exceptional fit and increased helmet stability
Flow-Through "ACVS" Advanced Channeling Ventilation System
Two multi-stage forward intake vents and a large integrated rear exhaust spoiler are combined with sculptured air channels allow the entire helmet to act as a full venturi exhaust system
Fresh air is channeled front to back, drawing heat and humidity up and out of the shell through four internal exhaust channels
Anti-Fog System
Side chin bar venturi exhaust vents for increased heat and humidity dissipation
Removable/Washable Nylex Interior
Easy to remove Nylex liner and cheek pads for cleaning and air drying
Sculptured wrap-around neck roll reduces wind noise
Padded chin strap design
3rd Generation 2-Stage Pivot/Compression Shield Closure System
HJ-09 anti-fog and scratch resistant hard-coated shield
3rd generation easy function tool-less shield removal system
Advanced, 2-stage shield pivot/compression system ensuring maximum shield seal
Aerodynamic flush-mounted fit for reduced turbulence noise
Scratch-resistant hard coated shield
Optically-correct 3D design
Shield radiation protection capacity rated to block 95% of harmful UV radiation
Soft helmet storage bag included
DOT-218 and SNELL-M2005 approved
Approx. 3.6 lbs/1640 grams
Price:
$125.99.
|
