|
|
8 Foot Triple-Hook Ratchet Tie-Down with Soft Hook - Jet Logic
Description: Jet Logic 8 Foot Triple-Hook Ratchet Tie-Down with Soft Hook
Ratchet secures entire PWC with only one tie-down
Three coated hooks, a soft hook and the 8' length make this the universal tie-down
Also great for snowmobiles, ATVs and motorcycles
Available in black only
Price:
$12.95.
|
|
|
T2 1-1/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 1-1/8" bar-mounts extend a twist-free ride
Designed to mount 1-1/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
T2 7/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 7/8" bar-mounts extend a twist-free ride
Designed to mount 7/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
Bar Mount Risers for 7/8 Inch bar - Fly Racing
Description:
CNC machined to precise specifications form the highest quality billet aluminum
Bar mount Risers made to fit either standard 7/8” or ProTaper® 11/8” sized handlebars
Multiple rise options available for use with either P-3 or Rubber Mount Upper triple clamps
Price:
$54.99.
|
|
|
Assault Street Fighter Top Triple Clamps - Roland Sands Designs
Description:
Assault Street Fighter Top Triple Clamps from Roland Sands
Billet aluminum construction
Top triple clamps feature direct bolt-on design and include stainless steel mounting hardware
Must be used with RSD Assault Street Fighter Risers, available for 7/8" or 1-1/8" oversized handlebar applications
Price:
$199.95.
|
|
|
Revolution Triple Clamp Set - Tag Metals
Description:
CNC-machined from cold-forged 7075 aluminum, to provide maximum strength and rigidity.
TAG Revolution clamp is lightweight to ensure better racing performance and bolts right onto your motorcycle.
Easy to install with its pre-pressed stem, seal and bearing, the Tag Revolution Clamp is designed for the ultimate racing performance.
Tag's innovative design of its 7075-CNC rubber mounts and T-bone will significantly improve the riding experience while dampening vibrations and impacts.
Bar mounts come in 1-1/8 inch I.D. and are black anodized for a longer lasting finish.
Price:
$404.99.
|
|
|
BR9EG-N-8 - Spark Plug - NGK
Description: NGK BR9EG-N-8 - Spark Plug
The workhorse, at the heart of smooth-running engines around the world.
OEM Quality
Triple-Gasket Sealing Process
Consistent Performance
Plug of Choice in Millions of Vehicles
Plug Specifications
Thread Diameter - 14mm
Hex Size - 13/16''
Resistor type
Price:
$21.99.
|
|
|
RS 7 Knee Brace - EVS
Description: EVS RS 7 Knee Brace
The ultimate knee brace with new graphics and improved brace panel design for comfort and protection
Polycentric EVS TrueMotion hinges on both sides of the leg are anatomically correct and imitate the flexion and extension motions of the knee; provide superb bilateral protection and stability
Hinges are made of aircraft spec. 6061 T6 aluminum
Protective covers over all hard parts of the brace reduce wear on your pants and your bike
Structural hypertension stops at 165°
Front fitting brace for greater ease and use of superior hyperextension control
EVS Extreme V impact panels on thigh and shin areas; now with expanded protection in the shin area
Triple layered protective "live" knee cup keeps you covered as you move
Lined with SharkSkin neoprene for non-slip fit
Improved strapping for greater comfort
Full range of motion
Measure calf and thigh circumference 5" above and below the center of the knee for sizes XXSmall-Small; 8" above and below the center of the knee for sizes Medium-XLarge
Match center of knee with center bend and snug up thigh and calf straps
Price:
$166.99.
|
|
|
Universal Handlebar Clamp Kit - Moose Racing
Description:
Adapts stock bar mounts to accept oversize (1 1/8") handlebars
An economical alternative to replacing expensive top triple clamps
Available in three sizes raising handlebars 8mm-50mm from stock setting
Includes mounting bolts and handlebar pad
Price:
$46.95.
|
|
|
V1 Stabilizer - GPR
Description:
Precision-machined rotary damper has six adjustable settings to give you the edge on and off the track
Specially designed to help reduce rider fatigue and eliminate headshake; riders will now have the energy and concentration to reduce lap times
Built-in 7/8" clearance under bars if fork tubes need to be raised or lowered for chassis setup
Compatible with stock or after market top triple clamps
Price:
$514.99.
|
|
|
Solid Bar Mounts - Tag Metals
Description:
For OEM top triple clamps with solid mounts
Allows installation of T2 and other 1-1/8" diameter bars on OEM triple clamps
CNC-machined aluminum kits fit all motorcycles with a solid triple clamp design
Not for use with rubber mounts
Knurled lower mounting surface to resist slippage
Adds 2/3" of rise over OEM mounts
Price:
$62.99.
|
|
|
Rear Turn Signal Bar - Kuryakyn
Description:
Kuryakyn's Rear Turn Signal Bar tucks in the rear signals
Bar measures 8-1/4" long, more than 4-3/4" shorter than stock bar
Die-cast, triple chrome-plated bar bolts on easily and works with stock turn signals
Price:
$47.99.
|
