|
|
Triple Clamp Bar Mount - Azonic
Description: Azonic Triple Clamp Bar Mount
C.N.C. machined from aircraft quality Alcoa aluminum in the U.S.A.
Superior in strength and ridity with an adjustable handlebar positioning at 8mm forward or stock positions
A full 1.5" of fork clamping surface to prevent slippage
C.N.C. machined logos
**Note: Handlebars not included
Price:
$134.99.
|
|
|
Dually ISO Footpeg with Clevis and 1 1/4in. Clamps - Kuryakyn
Description:
Patented Magnum Quick Clamp
Snap to install and provides long haul comfort
Can be installed on any round tubing (frames or engine guards)
1-1/4" diameter clamps
Note: Foot peg will end up perpendicular to the bar to which it is mounted
Sold in pairs
Price:
$123.99.
|
|
|
Universal Oversized Handlebar Clamps - Azonic
Description: Azonic Universal Oversized Handlebar Clamps
Constructed of aircraft quality Alcoa aluminum in the U.S.A.
C.N.C. machined logos
Bolt to existing triple clamps and allow the use of oversized bars while retaining the stock triple clamp
These clamps will raise the bar height by approximately 1"
Price:
$53.99.
|
|
|
Universal Handlebar Clamp Kit - Moose Racing
Description:
Adapts stock bar mounts to accept oversize (1 1/8") handlebars
An economical alternative to replacing expensive top triple clamps
Available in three sizes raising handlebars 8mm-50mm from stock setting
Includes mounting bolts and handlebar pad
Price:
$46.95.
|
|
|
Solid Bar Mounts - Tag Metals
Description:
For OEM top triple clamps with solid mounts
Allows installation of T2 and other 1-1/8" diameter bars on OEM triple clamps
CNC-machined aluminum kits fit all motorcycles with a solid triple clamp design
Not for use with rubber mounts
Knurled lower mounting surface to resist slippage
Adds 2/3" of rise over OEM mounts
Price:
$62.99.
|
|
|
T2 1-1/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 1-1/8" bar-mounts extend a twist-free ride
Designed to mount 1-1/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
T2 7/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 7/8" bar-mounts extend a twist-free ride
Designed to mount 7/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
Trojan 1-1/8 Inch. Rubber Bar Mounts - Tag Metals
Description:
Designed to replace OEM rubber mounts on CR/KX/RM models that come equipped with rubber mounts
Colors listed below refer to brand of bike
Sizes listed below refer to size of handlebars to be mounted
CNC-machined aluminum clamps
Mounts are reversible allowing two different forward positions
Must use stock rubber cones
Price:
$62.99.
|
|
|
Rotating Bar Clamp - Works Connection
Description:
Connection Works Rotating Bar Clamp
Durable and stylish
Install in place of the stock front brake master cylinder clamp
A poly sleeve incorporated into the design allows the master cylinder to rotate on impact and helps prevent damage
Machined from aircraft-grade aluminum and anodized for a factory hardware look
Available in blue, red, orange or silver
Price:
$27.95.
|
|
|
Rotating Bar Clamp with Hot Start Lever - Works Connection
Description: Rotating Bar Clamp with Hot Start Lever by Works Connection
Adds style, durability and efficiency to your bike
Installs in place of your stock front brake master cylinder clamp and moves the hot start lever to the right side of your bars
A poly sleeve incorporated into the design allows the master cylinder to rotate on impact and helps prevent damage
Machined from aircraft-grade aluminum and anodized for a factory hardware look
Price:
$64.95.
|
|
|
Universal Bar Mount Kit - Pro Taper
Description: Pro-Taper Universal Bar Mount Kit
Constructed from aircraft grade aluminum
Radius edges on the clamping area to keep from crimping the bar
The original Pro Taper universal bar mount
Adds 3/4?? to rise of bar
Exchange only on closeout items
Product limited to stock on hand
Price:
$35.99.
|
|
|
Solid Mount Adjustable Top Clamp - Fly Racing
Description:
The P-3 Upper triple clamp fits all 11/8” sized handlebars
Offers up to five handlebar mounting positions for improved rider positioning: Forward 6,12,& 18mm or Back 6mm
All clamps are CNC machined to precise specifications from the highest quality billet aluminum
Bar mount risers included (most stock height risers are 35mm, Other riser options sold separately)
Splayed bolt pattern on the handlebar mount clamp maximizes bar clamping strength
Price:
$156.99.
|
