|
|
Trojan 1-1/8 Inch. Rubber Bar Mounts - Tag Metals
Description:
Designed to replace OEM rubber mounts on CR/KX/RM models that come equipped with rubber mounts
Colors listed below refer to brand of bike
Sizes listed below refer to size of handlebars to be mounted
CNC-machined aluminum clamps
Mounts are reversible allowing two different forward positions
Must use stock rubber cones
Price:
$62.99.
|
|
|
Dually ISO Footpeg with Clevis and 1 1/4in. Clamps - Kuryakyn
Description:
Patented Magnum Quick Clamp
Snap to install and provides long haul comfort
Can be installed on any round tubing (frames or engine guards)
1-1/4" diameter clamps
Note: Foot peg will end up perpendicular to the bar to which it is mounted
Sold in pairs
Price:
$123.99.
|
|
|
Triple Clamp Bar Mount - Azonic
Description: Azonic Triple Clamp Bar Mount
C.N.C. machined from aircraft quality Alcoa aluminum in the U.S.A.
Superior in strength and ridity with an adjustable handlebar positioning at 8mm forward or stock positions
A full 1.5" of fork clamping surface to prevent slippage
C.N.C. machined logos
**Note: Handlebars not included
Price:
$134.99.
|
|
|
Universal Handlebar Clamp Kit - Moose Racing
Description:
Adapts stock bar mounts to accept oversize (1 1/8") handlebars
An economical alternative to replacing expensive top triple clamps
Available in three sizes raising handlebars 8mm-50mm from stock setting
Includes mounting bolts and handlebar pad
Price:
$46.95.
|
|
|
RT- One High-Mount Mufflers - Jardine
Description:
Boost power over a wide rpm band
Dyno-tested for a smooth power delivery and superior performance
Polished aluminum canister
Designed with experience gained as exhaust supplier to American Honda's road race team
Comes complete with CNC-machined billet clamp and stainless steel collector pipe (if required)
Click Here for Additional Exhaust Information
Price:
$1166.99.
|
|
|
One-Piece Handlebar Mount - Azonic
Description: Azonic One-Piece Handlebar Mount
Constructed of aircraft quality Alcoa aluminum in the U.S.A.
C.N.C. machined logos
This mount turns top bar clamp pieces into one solid unit
For double cross and deluxe wall handlebars
Price:
$53.99.
|
|
|
Universal Computer Mount - MSR Racing
Description:
Universal mounting system for enduro computers and roll charts
Mounts to OEM or aftermarket triple clamps
**Note: Computer and Triple Clamps not included, shown to demonstrate mounting system
Price:
$31.99.
|
|
|
Solid Bar Mounts - Tag Metals
Description:
For OEM top triple clamps with solid mounts
Allows installation of T2 and other 1-1/8" diameter bars on OEM triple clamps
CNC-machined aluminum kits fit all motorcycles with a solid triple clamp design
Not for use with rubber mounts
Knurled lower mounting surface to resist slippage
Adds 2/3" of rise over OEM mounts
Price:
$62.99.
|
|
|
T2 1-1/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 1-1/8" bar-mounts extend a twist-free ride
Designed to mount 1-1/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
T2 7/8 Inch. Optional Bar Mounts - Tag Metals
Description:
7075 CNC-machined rigid-guided 7/8" bar-mounts extend a twist-free ride
Designed to mount 7/8" handlebars to the Tag T2 Triple Clamps only
Sizes listed below refer to different rise heights available
Price:
$62.99.
|
|
|
Universal Bar Mount Kit - Pro Taper
Description: Pro-Taper Universal Bar Mount Kit
Constructed from aircraft grade aluminum
Radius edges on the clamping area to keep from crimping the bar
The original Pro Taper universal bar mount
Adds 3/4?? to rise of bar
Exchange only on closeout items
Product limited to stock on hand
Price:
$35.99.
|
|
|
Universal Clamp and Pad Kit - Fly Racing
Description:
The Clamp and Pad Kit Adapts Aero-Tapered and other 1-1/8” handlebars to fit standard 1/8” triple clamp perches
Fits most motorcycles, minis and ATVs that have standard handlebar mounts
Adds 1/4” of rise to handlebar
Price:
$44.99.
|
