|
|
Kit - Dynojet
Description:
Dynojet kit includes jets, needle, spring, shim and instructions
Price:
$77.99.
|
|
|
Stage 1-3 Intake Performance Kit - Dynojet
Description:
This kit contains all components required for a stage 1 and stage 3 conversion
Maximizes carburetor performance
Includes step-by-step instructions
Stage 1: 5% boost in horsepower; For use with stock air box
Stage 3: 10-15% boost in horsepower; For use with individual filters
Price:
$113.99.
|
|
|
Stage 1 Intake Performance Kit - Dynojet
Description:
This kit contains all components required for a stage 1 conversion
Maximizes carburetor performance
Includes step-by-step instructions
Stage 1: 5% boost in horsepower; For use with stock air box
Price:
$88.99.
|
|
|
Stage 1 Jet Kit - Dynojet
Description:
Dynojet Stage 1 Jet Kit
Stock engine/filters, stock/modified pipes; about a 5% power increase
Price:
$160.99.
|
|
|
Pull Type Shift Rod-Tension Sensor - Dynojet
Description:
Normally during "up shifting" you must roll off of the throttle and pull in the clutch in order to engage the next higher gear. In racing (both drag and road race), split seconds count. Rolling off the throttle, even slightly, slows your times and can be the difference between winning and losing
The Dynojet Quick Shifter (DQS) allows full throttle, clutch less shifting. This is done by momentarily cutting the fuel and or ignition, which unloads the transmission. During this time, the rider can shift up to the next gear without rolling off the throttle or using the clutch
The PCIIIUSB incorporates all of the Quick Shifter functionality in with the main fuel controller and is fully programmable. No cutting or splicing of your bike's wiring harness is necessary
The amount of "kill time" is adjustable by the user via the provided software. The user can also set a minimum rpm for the system to function. This keeps the system from activating at too low of an rpm, such as low speed road riding
Shift Rod Pressure/Tension Sensor - This universal sensor mounts inline with the shift rod. The customer must provide the appropriate "length and thread" shift rod. This sensor is available in both "push" and "pull" styles depending on the direction the shift rod moves during an up shift. For most applications, a Shift Rod Kit is available
Price:
$256.99.
|
|
|
Recalibration Kit - Dynojet
Description:
Recalibrate your stock Keihin CV carb to make full use of the performance potential
Includes the jets, needles, instructions, etc. necessary to recalibrate stock engines with CV carbs
Kits provide broad-range performance gains and maintain stock drive-ability
Price:
$87.99.
|
|
|
Serial Port 110V Power Adapter - Dynojet
Description:
Serial Port (non-USB) Power Adapter Kit for the Power Commander lll
110V
Price:
$89.99.
|
|
|
International Plug Adapter Kit - Dynojet
Description:
International Plug Adapter Kit for the Power Commander lll
Price:
$11.99.
|
|
|
Wide Band Commander Air to Fuel Ratio Monitor - Dynojet
Description:
Unlike current narrow band air/fuel ratio systems, Dynojet’s Wide Band Commander module uses a Bosch 5-wire LSU 4 wide band sensor that can read ratios from 10.0:1 to 18.0:1
When installed, the Wide Band Commander provides a 21/16" black- or white-faced 270" sweep electric air/fuel ratio gauge with programmable warning light and mounting hardware, plus data recording that can be retrieved and analyzed with the supplied software package
Software package requires Windows® SE/ME/2000/XP computer
Onboard memory allows data to be logged without using a laptop/PC, for download at a later time
Log file data can be played back in the software, or exported as text
Modular programmable for nitrous, water injection, timing retard and many other engine management options
Single wire tach hookup; no tach adapter required
Includes all required sensors, cables, software, 9V power adapter and all installation materials; the most complete kit on the market
Requires drilling hole in exhaust system to mount oxygen sensor 18mm x 1.5mm oxygen sensor weld boss and plug included; when not powered, sensor must be removed and plug attached in mounting hole in exhaust system
Dynolink compatible - allows Wide Band Commander to communicate with WinPEP7
Exclusive web site for software updates and technical tips: www.widebandcommander.com
Price:
$476.99.
|
|
|
Power Up Jet Kit - FMF
Description: New Power-Up jet kit makes jetting your carb simple. FMF teamed up with Dynojet to produce a kit that offers you a selection of jets and/or needles to get maximum horsepower out of your motorcycle fitted with an FMF exhaust. The easy to use instructions have diagrams and step-by-step procedures to help you get your jetting where it needs to be, no matter what elevation you ride at.
Price:
$53.99.
|
|
|
Jet Kit - Cobra
Description:
Designed by Dynojet for Cobra
Carburetor recalibration kits tuned specifically for cruisers using Cobra Boulevard exhaust and stock or aftermarket air filter
Provide improved throttle response and pulling power throughout the rpm band
All necessary performance components and step-by-step instructions are included for each model
Made in the U.S.A.
Price:
$80.99.
|
|
|
Stage 1 Jet Kit - Moose Racing
Description: Moose Racing Stage 1 Jet Kit
Moose Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems
Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy
Designed for machines with stock engines using the stock airbox, air filter and stock or aftermarket exhaust
Fully adjustable to allow for the use of well-designed aftermarket exhausts and stock replacement air filters
Improve throttle response and drivability
Power increases of approximately 5% throughout the entire power range
Price:
$59.95.
|
_Sensor.jpg "Pull Type Shift Rod-Tension Sensor - Dynojet")
