|
|
Factory Connection Replica Graphic Kit - One Industries
Description:
The Factory Connection Replica Kit from One Industries includes Decals for the Tank and Shrouds, Airbox, Rear Fender, Swingarm, Fork Guards, Backgrounds, and Front Fender
The exact TechnoGrip Seat Cover that Windham and the 250F squad use completes the kit
Numbers sold separately
Price:
$170.99.
|
|
|
Factory Connection Graphics - One Industries
Description:
The Factory Connection Replica Kit includes Shrouds, Rear Fender, Swingarm, Side Fork, and Front Fender Side decals
Numbers sold separately
Price:
$53.99.
|
|
|
Team Factory Connection Decal - One Industries
Description: One Industries Team Factory Connection Decal
11x17 and 12 mil. thick (Logo sheets are 4 mil.)
Represent Team Factory Connection with this great looking decal sheet. Includes riders: Kevin Windham, Josh Grant, Jake Weimer, Trey Canard, and Dan Reardon
Price:
$17.99.
|
|
|
Rotating Bar Clamp - Works Connection
Description:
Connection Works Rotating Bar Clamp
Durable and stylish
Install in place of the stock front brake master cylinder clamp
A poly sleeve incorporated into the design allows the master cylinder to rotate on impact and helps prevent damage
Machined from aircraft-grade aluminum and anodized for a factory hardware look
Available in blue, red, orange or silver
Price:
$27.95.
|
|
|
Weld-On Footpeg Extension - Works Connection
Description:
Works Connection Weld-On Footpeg Extension
An inexpensive way to get the factory look
Adds 1/2" of width to any standard footpeg
Added strength to enhance riding
Universal weld-on design
Sizes listed below are the sizes of footpegs each extension will fit on
Made in the USA
Price:
$29.95.
|
|
|
Rotating Bar Clamp with Hot Start Lever - Works Connection
Description: Rotating Bar Clamp with Hot Start Lever by Works Connection
Adds style, durability and efficiency to your bike
Installs in place of your stock front brake master cylinder clamp and moves the hot start lever to the right side of your bars
A poly sleeve incorporated into the design allows the master cylinder to rotate on impact and helps prevent damage
Machined from aircraft-grade aluminum and anodized for a factory hardware look
Price:
$64.95.
|
|
|
Oil Filler Plug - Works Connection
Description: Works Connection Aluminum Oil Filler Plug:
6061 T-6 Aluminum with an anodized finish and O-ring seal
Adds nice factory look
Made in the USA
**Note: Honda CRF450R models must order one for crankcase and one for transmisson. CRF250X/450X models only fit transmission side
Price:
$24.95.
|
|
|
Engine Plugs - Works Connection
Description: Engine Plug from Works Connection:
6061 T-6 Aluminum with an anodized finish and O-ring seal
Machined from billet aluminum, these new plugs are guaranteed to add a "Factory" look to your bike
Available in Blue or Red
Made in the USA
**Note: Kits include 2 plugs, except for Honda CRF250R/X, which includes 3 plugs.
Price:
$49.95.
|
|
|
Front Brake Cap - Works Connection
Description: Works Connections ATV Front Brake Caps
Install one of these CNC'd front Brake Reservoir Caps and add some Works Connection Factory Hardware to your quad
Machined from 6061 T- aluminum and anodized in Blue, Red or Silver for a custom look
Made in the USA
Price:
$29.95.
|
|
|
Skid Plate - Works Connection
Description:
Made from aircraft grade aluminum. Custom fit per make and model
Covers frame rails, but does not extend beyond rails
Oil drain access hole is pre-cut into the plate for easy oil changes without having to remove the skid plate
Features-Aircraft grade brackets, quality hardware, and a one-of-a-kind fit
Factory Foam is included
Made in USA.
Price:
$69.95.
|
|
|
SG-10 Boots - 2007 - Gaerne
Description: Made in italy with hand selected full-grain leather, this is the same boot that Heath Voss, Mike LaRocco and the rest of Team Factory connection use
Gaerne uses a special custom-made rubber compound sole that will outlast any of the competition
The SG-10 incorporates buckles that can be moved on the 2 top positions. This boot will accommodate almost any size rider
Protection + support = confidence. When you feel how fast the SG-10 breaks in and feel the support it provides, you will be a believer
No need for a bootie, the gel padding actually conforms to the rider's foot and takes up and slop
Try this boot on and you will never go back!
Exchange only on closeout items
Product limited to stock on hand
Price:
$199.99.
|
|
|
LED Taillight Kits - Clear Alternatives
Description:
Clear lens taillights that add a distinct look to any sportbike
Available in three styles; some styles are available with crystal clear or crystal clear smoke lens
LED cluster kits are a complete unit; includes two 2" round clusters with 50 LED taillights on a circuit board and a clear taillight lens
Cluster is mounted inside the taillight housing assembly and connected to an 1157 or 3057 bulb adapter plug that installs directly into the factory wiring harness
When brake lights are off, 100% of LED red is eliminated for a true clear taillight look
Superbright LED bulbs are rated for 100,000 hours of continuous use and require less power than standard 1157 bulbs
Some clusters are lens and bulb kits (no housing assembly); these include a 1.5" round cluster with 30 LEDs on an 1157 circuit-board-type bulb
No wire cutting or other modifications needed for installation
DOT approved
Price:
$112.99.
|
