|
|
Multi-Tool Kit - MSR Racing
Description:
2-way speed ratchet
8, 10, and 12mm 6-point sockets
4, 5, and 6mm allen heads
#2 Phillips screwdriver and #2 slot head screwdriver
Mounted in compact carrier
Price:
$22.99.
|
|
|
Stud Installation Tool - Motion Pro
Description:
Use this tool to install cylinder studs on most motorcycles without damaging th threads
Hex head is 3/4" or 19mm
Size 3/8" x 6 fits most Harley Davidson Motorcycles
Sold individually or in a set of 3
Set of 3 includes sizes 6 x 1.00, 8 x 1.25, and 10 x 1.25
Price:
$23.95.
|
|
|
Multi-Valve Tool - Motion Pro
Description:
Used to install the valve spring keepers without the need for a large, cumbersome valve spring compressor
Designed to fit the valves of four and five valve per cylinder heads (5mm valve stem diameter and larger)
Not recommened for use on Harley-Davidson engines
Made in the USA
Price:
$111.95.
|
|
|
Pilot Screw Adjusting Tool - Motion Pro
Description:
110° angled head for hard-to-reach pilot screws extends reach 1"
Fits most applications
17" length
Straight-slot blade tip
Price:
$28.95.
|
|
|
Wolfs Head Tool Pouch - Willie and Max
Description:
Black synthetic with embossed wolf head
Quick-release mounting to front forks or sissy bar
Two-buckle closure
12"W x 5"H x 2 ½"D
Price:
$35.99.
|
|
|
Metric Multi-purpose Tool - Motion Pro
Description:
Any trail rider whose fanny pack doesn't have one of these is seriously unprepared
Can be used to remove 8mm, 10mm, 12mm, and 14mm bolts; #2 and #3 Phillips head screws; small and medium straight slot screws; 5mm and 6mm Allen head bolts; and bottle caps
Versatility can be further enhanced by adding more 1/4" and 3/8" sockets
Price:
$54.95.
|
|
|
Spoke Torque Wrench - Excel
Description:
Accurately build and maintain your wheels
Allows you to increase or decrease torque on spokes
Lightweight chrome, aluminum body, calibrated to + or - 2 percent accuracy
6pc. set includes chrome aluminum bodied wrench, 1 chrome plated Pro Series 6pt. spline drive head, and 4 popular Japanese and other O.E. conventional type head sizes: 6.1, 6.3, 6.5, and 6.7mm
All heads are made from S45C hi-carbon steel, heat treated to an HRC 40-45 hardness
Comes in a handy composite RK Excel logo box (Blue)
Wrench has adjustability ranging from 5-60Lbs./inch
N.m and Kg.m cross reference chart included
Price:
$118.99.
|
|
|
Three Way T-Allen Wrench - MSR Racing
Description:
Comes complete with 4mm, 5mm and 6mm allen heads swaged on ends of tri-allen
Price:
$17.99.
|
|
|
4-Stroke Leak Down Tester - Motion Pro
Description:
Designed to check percentage of cylinder leakage in 4-stroke engines
Air source of 70 to 160 psi required to pressurize cylinder; gauge registers total leakage past rings, head gasket, intake and exhaust valves
Listen to carburetors, exhaust system, etc. to find the problem
Kit includes 10mm, 12mm and 14mm spark plug adapters, regulator and gauge
Price:
$154.95.
|
|
|
Ball End Allen Wrench Set - Motion Pro
Description:
Made of chrome-vanadium tool steel
Available sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm
Ball end allows for better access to Allen-head bolts (up to 25° working handle)
Convenient holder included
Price:
$17.95.
|
|
|
Nitrogen Shock Guage and Filler - Motion Pro
Description:
A precision pressure gauge calibrated to 300 psi complete with bleeder valve and T-handle plunger pin chuck
Accurately reads nitrogen gas pressure within a rear shock with not loss of gas
Swivel-head chuck features 12" of flexible hose
Complete instructions included
Price:
$214.95.
|
|
|
3/8" Drive Impact Driver - Bikemaster
Description: Street Tools 3/8" Drive Impact Driver
Removable 3/8" head
Can be used with standard or deep 3/8" drive sockets or extensions
2 flat and 2 phillips bits included
Price:
$17.99.
|
