|
|
Replacement LED Indicator Lights-1156 Style - Drag Specialties
Description: Drag Specialties Replacement LED Indicator Lights-1156 Style
Brighter than normal with no filaments to vibrate and fail
Plug into most offset pin sockets and taillight lenses with .75" openings
Turns appropriate colors when lit
Actual product may vary from web image
Sold each
Note: Due to the darkness of some red taillight lenses, the red LED should not be used. Part number 0906-6030 will not fit Deuce-style turn signals
Price:
$19.95.
|
|
|
LED Accessory Light - OnGuard
Description: OnGuard LED Accessory Light
Firstgear LED Accessory Light for use in Firstgear jackets
Laws vary by state, check your local laws for any restrictions before using a supplemental light device
Price:
$8.99.
|
|
|
LED Battery Gauge - Kuryakyn
Description: Kuryakyn LED Battery Gauge
Kuryakyn's LED Battery Gauge lets you know if your motorcycle's charging system is working with just a glance
Green LED indicates normal operating range of 12.5 to 14.5V
Amber LED warns the bike is not charging
If reading drops below 10V or exceeds 15V, flashing red LED alerts the rider
Simple two-wire connection
Gauge measurements approximately 2" L x 3/4" W x 3/16" H; daylight sensor automatically adjusts LED brightness
Price:
$37.99.
|
|
|
LED Marker Lights - Competition Werkes
Description:
Flush-mount front marker lights fit in the indents for the OEM turn signals
Angled LED board illuminates to the side and front
Factory flash rate
Fit factory wiring connectors
**Note: Honda and Suzuki applications may require wire splicing
Price:
$40.99.
|
|
|
Iron Cross LED Light - Kuryakyn
Description: Iron Cross LED Light
Easily attaches to Kuryakyn’s Raptor sissy bar, or use for custom applications
Functions as an auxiliary run/brake light
Measures 4 1/2”L x 5”H x 3/4”D
Each sold separately
Sissy bar not included
Price:
$85.99.
|
|
|
LED Taillight Kits - Clear Alternatives
Description:
Clear lens taillights that add a distinct look to any sportbike
Available in three styles; some styles are available with crystal clear or crystal clear smoke lens
LED cluster kits are a complete unit; includes two 2" round clusters with 50 LED taillights on a circuit board and a clear taillight lens
Cluster is mounted inside the taillight housing assembly and connected to an 1157 or 3057 bulb adapter plug that installs directly into the factory wiring harness
When brake lights are off, 100% of LED red is eliminated for a true clear taillight look
Superbright LED bulbs are rated for 100,000 hours of continuous use and require less power than standard 1157 bulbs
Some clusters are lens and bulb kits (no housing assembly); these include a 1.5" round cluster with 30 LEDs on an 1157 circuit-board-type bulb
No wire cutting or other modifications needed for installation
DOT approved
Price:
$112.99.
|
|
|
Assimilator-Taillight Integrator Kit - Competition Werkes
Description: Competition Werkes Assimilator-Taillight Integrator Kit
Allows you to integrate your turn signals into your tailight
If desired, a pulsating brake light function is also provided
Designed for any bike with side-by-side dual bulb taillights
**Note: Will not work with stock LED lights
Price:
$45.99.
|
|
|
Swingarm Covers Kit with LED Phantom Covers - Kuryakyn
Description:
Easy-to-install chrome covers offer an alternative to downtime and plating
Lighted and unlighted versions available
Both kits include four covers for tube section of swingarm, two upper swingarm covers, two Phantom covers and all necessary hardware
Lighted covers have single-function LEDs that can be wired as auxiliary lights, turn signals or brake lights
**Note: LEDs are not DOT approved
Price:
$189.99.
|
|
|
Fender Strut Lights - Kuryakyn
Description:
Kuryakyn's Fender Strut Lights are an economical alternative to billet strut lights
Blend smoothly with the stock fender strut
Utilize either single-filament bulbs or bright LEDs
Bulb strut lights come with red and amber lenses
LEDs produce an incredible amount of light without the heat of a conventional bulb
If LEDs are used with the Kuryakyn Run-Turn-Brake Controller, strut lights can work as running, brake and turn signal lights
Not DOT approved
Sold in pairs
Price:
$94.99.
|
|
|
LED Strut-Mount Mini Bullet Lights - Kuryakyn
Description:
Powerful mini lights fit seamlessly on your fender strut
Kuryakyn's LED Strut-Mount Mini Bullet Lights have a clean look, no exposed wires or fasteners
CAD-designed lenses have a jeweled appearance that gives you a more reflective surface for a brighter glow over standard flat lenses
Come with clear lens installed; extra set of colored lenses that match LED color included so you can customize the look of your lights
Mount in rear fender strut hole with 5/16" screw
Sold in pairs
Price:
$75.99.
|
|
|
Flush Mount LED Front Turn Signals - Hotbodies Racing
Description:
Hotbodies Racing's sleek, Flush-Mount LED Blinkers are designed for an aerodynamic edge. These unique, Industry First custom-designed blinkers fit neatly into the fairing pockets of the factory blinker stalks, giving your bike a clean, slippery look of speed.
Because these Flush-Mount Blinkers are shaped for each model bike, their integrated finish accentuate the streamlined designs. These Flush-Mount Blinkers feature amber LED Lights behind your choice of clear, smoke, red or blue lenses for an exacting edgeless fit.
**Note: Requires Load Equalizer to compensate for load difference so the LEDs flash at normal blinker speeds
Exchange only on closeout items
Product limited to stock on hand
Price:
$35.99.
|
|
|
Flush Mount Mirror Block-Off LED Turn Signals - Hotbodies Racing
Description:
Replaces stock mirrors with flush mount LED turn signals
Customized to individual models for a perfect fit
Fit flush but refract light forward for visibility
Use four high-power "Piranha Style" LEDs
Available with clear or colored lenses
**Note: Requires Load Equalizer to compensate for load difference so the LEDs flash at normal blinker speeds
Exchange only on closeout items
Product limited to stock on hand
Price:
$35.99.
|
