|
|
Cable Lube - Motion Pro
Description:
Motion Pro cable lube provides the smoothest operation and longest cable life
Our special blend of Redline synthetic lubricant and rust inhibitors keep your cables working smoothly in any weather conditions from hot to cold, wet or dry
Not the cheapest, but designed to be the best
Ideal for use with Motion Pro Cable Luber
Depending on riding conditions, we recommend lubricating your cables between every ride or every other ride
Price:
$11.95.
|
|
|
Cable Luber - Motion Pro
Description:
Used to inject lubricant into cable housing
Clamps over housing and wire allowing an aerosol can to be connected
Once lube runs out the far end, the cable is lubricated
Price:
$9.50.
|
|
|
Turbo Throttle - Motion Pro
Description:
Polished die-cast aluminum housing
Smooth pulley-type operation
Opens 28-38 mm carburetors
Perfect ratio for off-road motorcycles or ATV's
Comes complete with cable adjusters and dust boot
4 ?" handgrip
Price:
$20.95.
|
|
|
Optimate lll Cigarette Lighter Adapter - Motion Pro
Description:
Combination connector for standard automotive cigar socket and 12V DIN socket as found on BMW and Triumph motorcycles. Twist & remove RED cap to fit standard DIN socket
AWG#18 UL / CSA approved SPT-2 cable
Internal fuse
Matched with 12V DIN socket / receptacle below.
Price:
$17.99.
|
|
|
Pedal Anchor Kit - Motion Pro
Description:
Safety cable attachment to prevent loss or drastically bending shift and brake levers
Cable is looped between lever end and frame
Kit includes anchor wire and special crimp fittings
Price:
$10.95.
|
|
|
Wing Nut Sockset Set - Motion Pro
Description:
Minimizes risk of damage when removing wing nuts that are over-tightened or stuck
Includes large and small 3/8" drive wing nut sockets
Ideal for use on brake cables and rods
Can be use with air tools
Price:
$33.95.
|
|
|
Throttle Cable - Motion Pro
Description:
Standard black vinyl coil-wound housing
Meets or exceeds O.E. quality
Inner nylon sleeve for longer life and smooth operation
Image is for reference only, actual product may vary
Available in Push, Pull, and Push-Pull Set
Pull cable : for all bikes Street, Dirt, and ATV’s
Push cable : for modern four stroke Bikes and ATV's
Push-Pull cable set : a complete set for the modern four stroke Bikes and ATV's
*Note: TTR125 E/L throttle cable is 3 inches longer
Price:
$48.95.
|
|
|
Pit Bike Complete Kit - Pro Taper
Description: Pro Taper Pit Bike Complete Kit
Fully adjustable Pro Taper triple clamp
Clamp design reduces stock fork flex
CRF50 Complete Kit Includes:
7" rise chromoly Pro Taper handlebar and pad (Bar is clear coated with ultra-tough epoxy paint)
Throttle cable
Brake cable
Kill Switch
Brake lever/perch
Pro Taper half waffle grips
Throttle housing assembly
KLX110/DRZ110 Complete Kit Includes:
143mm rise SE Pro Taper handlebar and pad
Multi-position Clamp
Half waffle grips
Brake cable
Click Here For Top Clamp
Price:
$206.99.
|
|
|
Clutch Cable - Motion Pro
Description: Motion Pro Clutch Cable
Cables are nylon lined and use precise OEM component dimensions
Price:
$14.95.
|
|
|
Clutch Cable - Motion Pro
Description:
Standard black vinyl coil-wound housing
Meets or exceeds O.E. quality
Inner nylon sleeve for longer life and smooth operation
Image is for reference only, actual product may vary
Price:
$32.95.
|
|
|
Pro Perch - Works Connection
Description: Works Connection Pro Perch
Machined from 6061 T-6 billet aluminum
EZ adjuster lets you adjust cable slack on the fly
Positive detents for precise cable adjustments
Nylon sleeve allows perch to rotate on impact which helps prevent broken levers
Includes a lever with a needle bearing for ultra smooth pull and minimum lever slop
Price:
$124.95.
|
|
|
Rally Pro Handguards - Acerbis
Description:
The original Rally Pro handguards are equipped with an aluminum bar for the strongest protection available
Aluminum guard for maximum strength
Nylon composite material injection molded in and around the aluminum guard for increased protection
Indexed steel bar-end insert mounts solid and will not allow guard to rotate in a crash
Comes equipped with mounting kit to fit 7/8" steel and 7/8" aluminum handlebars
Mounts to the handlebar by cutting off the end of each grip and the throttle tube to install bar inserts
Plenty of room for cables and brake lines
Optional spoilers and mounting kits for oversized handlebars are sold separately
Price:
$79.99.
|
