|
|
Multi-Valve Tool - Motion Pro
Description:
Used to install the valve spring keepers without the need for a large, cumbersome valve spring compressor
Designed to fit the valves of four and five valve per cylinder heads (5mm valve stem diameter and larger)
Not recommened for use on Harley-Davidson engines
Made in the USA
Price:
$111.95.
|
|
|
Valve Core Remover - Motion Pro
Description: This will be the most borrowed tool in the tool box
Eases removal and installation of standard valve cores in tubed or tubeless valve stems
Made from hex stock
Price:
$2.95.
|
|
|
5/16"-Line Fuel Valve - Motion Pro
Description: Motion Pro 5/16"-Line Fuel Valve
For use with auxiliary fuel tank or other use requiring an in-line installation
Feature double neoprene seals and O-rings
Smooth and positive operation
Not recommended for engines over 300cc
Price:
$12.99.
|
|
|
3/16"-Line Fuel Valve - Motion Pro
Description: Motion Pro 3/16"-Line Fuel Valve
For use with auxiliary fuel tank or other use requiring an in-line installation
Feature double neoprene seals and O-rings
Smooth and positive operation
Not recommended for engines over 200cc
Price:
$11.50.
|
|
|
4-Stroke Leak Down Tester - Motion Pro
Description:
Designed to check percentage of cylinder leakage in 4-stroke engines
Air source of 70 to 160 psi required to pressurize cylinder; gauge registers total leakage past rings, head gasket, intake and exhaust valves
Listen to carburetors, exhaust system, etc. to find the problem
Kit includes 10mm, 12mm and 14mm spark plug adapters, regulator and gauge
Price:
$154.95.
|
|
|
Compression Tester - Motion Pro
Description:
Designed to check cylinder compression
Contains hoses for 10, 12 and 14mm spark plug applications
Includes a quick-disconnect with pressure-release valve, 300 psi gauge and plastic carrying case, complete with instructions
Made in the USA
Price:
$109.95.
|
|
|
Hydraulic Brake Bleeder - Motion Pro
Description:
New brake bleeder will aid in the bleeding and servicing of hydraulic brakes
Makes bleeding brakes a one man job
The unique check valve allows fluid and air to escape while preventing air from re-entering the system
Price:
$19.95.
|
|
|
Nitrogen Needle Set - Motion Pro
Description:
Used to fill shocks with self-sealing rubber valves (some Yamaha, Fox and Ohlins)
Can be used in conjunction with the Nitrogen Shock Gauge and Filler
Instructions included
Made in the U.S.A
Price:
$24.95.
|
|
|
Nitrogen Shock Guage and Filler - Motion Pro
Description:
A precision pressure gauge calibrated to 300 psi complete with bleeder valve and T-handle plunger pin chuck
Accurately reads nitrogen gas pressure within a rear shock with not loss of gas
Swivel-head chuck features 12" of flexible hose
Complete instructions included
Price:
$214.95.
|
|
|
Quick-Disconnect Dual Shut-Off Coupling - Motion Pro
Description:
Dual shut-off valves allow fuel to flow when connected; when disconnected, fuel will not flow from either line
Ideal for fuel tanks equipped with a crossover line
For fuel supply from fuel tank to carburetor, use the quick-disconnect couplings with the single shut-off valve
Made in the USA
Price:
$32.95.
|
|
|
Pressure Relief Valve Kit - Moose Racing
Description:
Release built-up fork air pressure with the push of a button
Valves allow forks to work at peak performance without the use of any tools
O-ring under cap creates a positive seal to keep dirt, mud and water out
Replaces OEM fork bleeder screws on Showa, Kayaba and WP
10.5 mm high installed
Installation tool included
Size Information:
Orange valves fit upside down KTM WP forks
Red, Blue and Stealth fit Showa and Kayaba (except Kawasaki KX450F)
Green valves are designed for the deep fork caps on KX450F, but will fit any KX models
Price:
$34.95.
|
|
|
Quick-Disconnect Single Shut-Off Coupling - Motion Pro
Description:
Shut-off valves allow fuel to flow when connected; when disconnected, fuel will not flow from either line
Ideal for fuel tanks equipped with a crossover line
For fuel supply from fuel tank to carburetor, use the quick-disconnect couplings with the single shut-off valve
Made in the USA
Price:
$19.95.
|
